Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Data limitation
No geometry is recorded for 1999 Marin San Anselmo.
- Data limitation
Only 2000 Marin San Anselmo has enough published drivetrain data for gearing calculations.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Gearing unavailable for this size.
Lowest0.93:1Highest4.36:1Total range468%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 700C×35; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
1999 Marin San Anselmo
2000 Marin San Anselmo
Overview
Model Year
1999
2000
Brand
Marin
Marin
Model
San Anselmo
San Anselmo
Bicycle Type
City/commuter
City/commuter
Original MSRP
$559.00
$545.00
Colors
—
Brush Polish
Sizes
—
13.5", 15.5", 17.5", 19", 20.5", womens 17"
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
7005 aluminum, butted
Ovation 7000 aluminum
Fork
RST 801, 1.6" travel
In-Sync 168
Fork Material
Aluminum/chromoly, triple-clamp crown
Aluminum, triple-clamp crown
Drivetrain
Component Group
Hybrid Mix
Hybrid Mix
Shifters
Shimano Alivio RapidFire SL
Shimano Alivio RapidFire Plus
Front Derailleur
Shimano
Shimano Deore
Rear Derailleur
Shimano Alivio
Shimano Alivio
Crankset
Shimano, 28/38/48 teeth
Cyclone 335NP, 28/38/48 teeth
Bottom Bracket
—
Sealed cartridge
Rear Cogs
8-speed
8-speed, 11 - 30 teeth
Chain
1/2 x 3/32"
Shimano CN-UG50, 1/2 x 3/32"
Pedals
Aluminum cage w/clips & straps
Resin body/aluminum cage w/clips & straps
Brakes
Brakes
Shimano Nexave modulated V brakes, Shimano Alivio levers
Shimano linear pull brakes, aluminum linear-pull levers
Cockpit & Contact Points
Headset
Marin
Vp
Handlebar
Marin alloy
Alloy riser
Handlebar Extensions
Not included
Not included
Stem
Marin alloy
Alloy
Saddle
Marin Comfort
Marin Comfort DLX
Seatpost
Marin Ovation, suspension
Sync P-127 suspension, 27.0mm diameter
Wheels & Tires
Hubs
Shimano Alivio
Shimano Alivio
Rims
Alloy, 36-hole
Alloy, 36-hole
Spokes
Stainless steel, 2.0mm
Stainless steel, 2.0mm straight gauge
Front Tire
700 x 38c street tread
700 x 35c WTB All Terrainasaurus
Wheel Size
700c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
—
71°
Seat-tube angle
—
73°
Chainstay / rear center
—
439.4 mm
Wheelbase
—
1063.6 mm
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.