Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Handling

    2001 Schwinn Moab 3 has a 0.7° slacker head-tube angle than 1998 Schwinn Moab 3 in the archived geometry. Frame size is not identified for 1998 Schwinn Moab 3 and 2001 Schwinn Moab 3.

    Fork offset, tire size and wheelbase also affect steering; head angle alone is not a handling verdict.

  2. Gearing

    2001 Schwinn Moab 3 has a 12% lower climbing ratio than 1998 Schwinn Moab 3.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1998 Schwinn Moab 3Size Legacy reference · 42/32/22T · 11–30T · 8-speed
Lowest0.73:1Highest3.82:1Total range521%
Estimated speed at 90 RPMLowest gear5.1 mphHighest gear26.5 mph

Rear tire: 26×1.95.

2001 Schwinn Moab 3Size Legacy reference · 42/32/22T · 11–34T · 9-speed
Lowest0.65:1Highest3.82:1Total range590%
Estimated speed at 90 RPMLowest gear4.5 mphHighest gear26.8 mph

Uses front tire 26×2.1; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1998 Schwinn Moab 3
2001 Schwinn Moab 3
Overview
Model Year
1998
2001
Brand
Schwinn
Schwinn
Model
Moab 3
Moab 3
Bicycle Type
Mountain bike, front suspension
Mountain bike, front suspension
Original MSRP
$749.95
$769.95
Colors
Metallic green/black, Metallic Red/Black
Mini Flake Silver, Vivid Yellow
Sizes
15", 17", 19", 21"
(13 " aand 23" in Yellow), 13", 15", 17", 19", 21", 23"
Weight
—
—
Frameset
Frame Construction
Welded
TIG-welded
Frame Material
7005 aluminum, double-butted
Aluminum
Fork
Rock Shox Indy C
Manitou SX, 4.0" travel
Fork Material
Aluminum/magnesium, triple-clamp crown
Aluminum/magnesium, triple-clamp crown
Drivetrain
Component Group
Mountain Mix
Mountain Mix
Shifters
Shimano STX-RC RapidFire SL
Shimano Deore LX RapidFire SL
Front Derailleur
Shimano STX top-swing
Shimano Deore LX
Rear Derailleur
Shimano STX-RC
Shimano Deore LX
Crankset
Shimano STX, 22/32/42 teeth
TruVativ Firex LR, 22/32/42 teeth
Rear Cogs
8-speed, 11 - 30 teeth
9-speed, 11 - 34 teeth
Chain
1/2 x 3/32"
1/2 x 3/32"
Pedals
Aluminum cage w/clips & straps
Steel cage, nylon body, clips and straps
Brakes
Brakes
Avid 1D-10 brakes, Avid AD-1.0 levers
Shimano V-brake brakes, Avid AD3 Levers levers
Cockpit & Contact Points
Headset
1 1/8" threadless Tioga TG
ICBM Type II Cartridge
Handlebar
Aluminum, butted
Kore 1.0" Riser XC
Handlebar Extensions
Welded aluminum
Not included
Stem
Kore Lite 3D
Kore Lite 2
Saddle
Schwinn Moab racing w/Kevlar
Schwinn Race Anatomical
Seatpost
DP-1 aluminum
Aluminum micro-adjust
Wheels & Tires
Hubs
Front: Formula Q/R, Rear: Shimano Alivio
Formula aluminum
Rims
Mavic X138, 32-hole
Tioga Factory XC Sport, 28-hole/32-hole
Spokes
Stainless steel, 2.0mm straight gauge
Stainless steel
Front Tire
26 x 1.95" Schwinn Moab Leader
26 x 2.10" Michelin XL
Rear Tire
26 x 1.95" Schwinn Moab Trail
—
Wheel Size
26" wheels
26" wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
71.5°
70.8°
Seat-tube angle
73.5°
72.3°
Chainstay / rear center
424.2 mm
424.2 mm
Wheelbase
1036.3 mm
1038.9 mm
Fork offset / rake
40.6 mm
—

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Scroll to Top