Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Handling

    1998 GT Edge Titanium has a 0.5° slacker head-tube angle than 1994 GT Edge Titanium in the archived geometry. Frame size is not identified for 1998 GT Edge Titanium and 1994 GT Edge Titanium.

    Fork offset, tire size and wheelbase also affect steering; head angle alone is not a handling verdict.

  2. Gearing

    1998 GT Edge Titanium has a 8% lower climbing ratio than 1994 GT Edge Titanium.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1998 GT Edge TitaniumSize Legacy reference · 53/39T · 12–25T · 9-speed
Lowest1.56:1Highest4.42:1Total range283%
Estimated speed at 90 RPMLowest gear11.0 mphHighest gear31.1 mph

Uses front tire 700C×23; rear size isn’t listed.

1994 GT Edge TitaniumSize Legacy reference · 53/39T · 12–23T · 8-speed
Lowest1.70:1Highest4.42:1Total range260%
Estimated speed at 90 RPMLowest gear11.9 mphHighest gear31.1 mph

Uses front tire 700C×23; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1998 GT Edge Titanium
1994 GT Edge Titanium
Overview
Model Year
1998
1994
Brand
GT
GT
Model
Edge Titanium
Edge Titanium
Bicycle Type
Road race & triathlon
Road race & triathlon
Original MSRP
$3,773.00
$3,849.00
Colors
Polished
—
Sizes
50 cm, 52 cm, 54 cm, 56 cm, 58 cm, 60 cm
50, 52, 54, 56, 58, 60
Weight
—
—
Frameset
Frame Construction
TIG-welded
Welded titanium
Frame Material
3Al/2.5V titanium
3Al/2.5V titanium
Fork
GT Edge
Aluminum, bonded, Kinesis
Fork Material
Carbon fiber composite, aero crown
—
Drivetrain
Component Group
Shimano Dura-Ace
Shimano Dura-Ace STI
Shifters
Shimano Dura-Ace STI Dual Control
Shimano Dura-Ace STI Dual Control
Front Derailleur
Shimano Dura-Ace, braze-on
Shimano Dura-Ace
Rear Derailleur
Shimano Dura-Ace
Shimano Dura-Ace
Crankset
Shimano Dura-Ace, 39/53 teeth
Shimano Dura-Ace, 39/53 teeth
Bottom Bracket
Shimano BB-7700
—
BB Shell Width
68mm English
—
Rear Cogs
9-speed, 12 - 25 teeth
8-speed, 12 - 23 teeth
Chain
Shimano CN-7700, 1/2 x 3/32"
Shimano Dura-Ace
Pedals
Not included
Shimano PD-7410 Dura-Ace SPD (clipless)
Brakes
Brakes
Shimano Dura-Ace Dual Pivot brakes, Shimano Dura-Ace levers
Shimano Dura-Ace brakes, levers
Cockpit & Contact Points
Headset
1" Shimano Dura-Ace
—
Handlebar
Profile Hammer
Profile Hammer w/Padded Tape
Handlebar Extensions
Not included
—
Stem
Syncros Altura
Syncros Altura TIG-welded aluminum
Saddle
Selle Italia Flite
Vetta TT, tubular vanadium rails, leather cover
Seatpost
Thomson Elite
Syncros Propost alloy Micro-Adjust
Wheels & Tires
Hubs
Shimano Dura-Ace
Shimano Dura Ace
Rims
Mavic Open SUP, 32-hole
Mavic Open SUP CD, 32-hole
Spokes
DT stainless steel, 2.0mm double-butted
—
Spoke Nipples
Alloy nipples
—
Front Tire
700 x 23c Michelin Hi Lite Synergic
700 x 23c Continental Grand Prix Kevlar
Wheel Size
700c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
73.5°
74°
Seat-tube angle
73.5°
73.5°
Chainstay / rear center
405 mm
410 mm
Wheelbase
991 mm
981 mm
Fork offset / rake
—
40 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Scroll to Top