Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. No key difference could be established from the available data. Check the full table for the details.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1998 Burley ZydecoSize Legacy reference · 52/42/28T · 13–28T · 7-speed
Lowest1.00:1Highest4.00:1Total range400%
Estimated speed at 90 RPMLowest gear6.7 mphHighest gear26.8 mph

Uses front tire 26×1.5; rear size isn’t listed.

1997 Burley ZydecoSize Legacy reference · 48/38/28T · 13–28T · 7-speed
Lowest1.00:1Highest3.69:1Total range369%
Estimated speed at 90 RPMLowest gear6.7 mphHighest gear24.7 mph

Uses front tire 26×1.5; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1998 Burley Zydeco
1997 Burley Zydeco
Overview
Model Year
1998
1997
Brand
Burley
Burley
Model
Zydeco
Zydeco
Bicycle Type
Tandem (mountain)
Tandem (mountain)
Original MSRP
$1,100.00
$1,100.00
Colors
Jet black
Chinese red
Sizes
Captain 19"/stoker 15"
Captain 19"/stoker 15"
Weight
41 lb
41 lb
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
True Temper Tandem chromoly, Burley Exclusive
True Temper Tandem chromoly, butted
Fork
Burley
Burley
Fork Material
True Temper Tandem chromoly, Burley-Exclusive, unicrown crown
True Temper Tandem chromoly, unicrown crown
Drivetrain
Component Group
Tandem Mix
—
Shifters
Grip Shift SRT-400
Grip Shift SRT-400i
Front Derailleur
Sachs Centera, bottom-pull/clamp-on 28.6mm
Sachs Centera, bottom-pull/clamp-on 28.6 mm
Rear Derailleur
Shimano Alivio
Shimano Alivio
Crankset
Burley Special Tandem, 28/42/52 teeth
Tracer aluminum, 28/38/48 teeth
Bottom Bracket
Tange sealed, 124mm spindle
Tange-Seiki sealed, 124 mm spindle
BB Shell Width
73mm English
73mm English
Rear Cogs
7-speed, 13 - 28 teeth
7-speed, 13 - 28 teeth
Chain
Shimano CN-HG50, 1/2 x 3/32"
Shimano CN-HG50, 1/2 x 3/32"
Pedals
Resin
Resin
Brakes
Brakes
Shimano Alivio M-System brakes, Shimano Alivio levers
Shimano Alivio M-System brakes, Dia-Compe SS-187 levers
Cockpit & Contact Points
Headset
1 1/8" Tange-Seiki Avenger
1 1/8" Tange-Seiki Avenger
Handlebar
Burley MTB, aluminum
Burley 6061 T6 aluminum
Handlebar Extensions
Not included
—
Stem
Burley chromoly
Burley chromoly
Saddle
Vetta Comfort
Vetta Comfort
Seatpost
Hsin Lung aluminum, 26.6mm diameter
Hsin Lung aluminum, 26.6 mm diameter
Wheels & Tires
Hubs
Suzue Sealed-tech
Suzue Sealed-tech Tandem
Rims
Weinmann 4019, 36-hole
Weinmann 4019, 36-hole
Spokes
Orient steel, 2.0mm straight gauge
Orient steel, 2.0mm straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
26 x 1.50" Cheng Shin City
26 x 1.50" Cheng Shin
Wheel Size
26" wheels
26" wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
73°
73°
Seat-tube angle
73°
73°
Chainstay / rear center
438 mm
438 mm
Wheelbase
1730 mm
1730 mm
Fork offset / rake
42 mm
42 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Sponsored affiliate link
Scroll to Top