Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Data limitation

    No geometry is recorded for 1998 Co-Motion Cappuccino.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1998 Co-Motion Cappuccino54/44/32T · 11–28T · 8-speed
Lowest1.14:1Highest4.91:1Total range430%
Estimated speed at 90 RPMLowest gear8.2 mphHighest gear35.1 mph

Uses front tire 700C×28; rear size isn’t listed.

1997 Co-Motion CappuccinoSize Legacy reference · 54/44/32T · 11–28T · 8-speed
Lowest1.14:1Highest4.91:1Total range430%
Estimated speed at 90 RPMLowest gear8.2 mphHighest gear35.1 mph

Uses front tire 700C×28; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1998 Co-Motion Cappuccino
1997 Co-Motion Cappuccino
Overview
Model Year
1998
1997
Brand
Co-Motion
Co-Motion
Model
Cappuccino
Cappuccino
Bicycle Type
Tandem (road)
Tandem (road)
Original MSRP
$3,125.00
$3,125.00
Colors
Bad Ass Red, Dark Charcoal Metallic, Dark Jade Green Metallic, Dark Maroon Metallic, Sapphire Blue
Blue, Bronze, Chrome Yellow, Cream, Custom, Green Metallic, Red
Sizes
Captain 21"/stoker 18", captain 21"/stoker 19", captain 23"/stoker 20"
Captain 21"/stoker 18", captain 22"/stoker 19", captain 23"/stoker 20"
Weight
—
38 lb
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Reynolds 531
Co-Motion Reynolds 531
Fork
Co-Motion
Co-Motion
Fork Material
Chromoly, unicrown crown
Reynolds 531, unicrown crown
Rear Shock
Softride Suspension Beam, 5.0" travel
—
Drivetrain
Component Group
Tandem Mix
Co-Motion Tandem Group
Shifters
Shimano bar-end
Shimano 600 Ultegra bar-end
Front Derailleur
Sachs New Success
Sachs New Success, bottom-pull/clamp-on 31.8 mm
Rear Derailleur
Sachs New Success
Sachs New Success
Crankset
Ritchey Tandem, 32/44/54 teeth
Ritchey Tandem, 32/44/54 teeth
Bottom Bracket
Shimano BB-UN52
Shimano BB-UN51, 122.5 mm spindle
BB Shell Width
—
68mm English
Rear Cogs
8-speed, 11 - 28 teeth
8-speed, 11 - 28 teeth
Chain
Sachs SC-M55, 1/2 x 3/32"
Sachs SC-M55, 1/2 x 3/32"
Pedals
Not included
Not included
Brakes
Brakes
Shimano Deore LX V-Brake brakes, Dia-Compe 287 levers
Shimano Deore XT M-System brakes, Dia-Compe 287 levers
Cockpit & Contact Points
Headset
1 1/8" Shimano Deore LX
1 1/8" YST aluminum
Handlebar
Profile
Profile Hammer
Stem
Co-Motion
Co-Motion chromoly
Saddle
Terry men's/women's
Terry men's/Terry women's
Seatpost
Kalloy Uno, 29.8mm diameter
Kalloy Uno/Softride Suspension Beam rear, 29.8 mm diameter
Wheels & Tires
Hubs
Phil Wood tandem
Phil Wood tandem
Rims
Mavic 217 SUP, 48-hole
Mavic T 217 SUP, 40-hole
Spokes
DT stainless steel, 2.0mm straight gauge
DT stainless steel, 2.0mm straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
700 x 28c Continental Super Sport
700 x 28c Continental Super Sport
Wheel Size
700c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
—
73°
Seat-tube angle
—
73°
Fork offset / rake
—
50 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Campaign
Scroll to Top