Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Gearing

    1997 Haro Mini Blaster has a 20% lower climbing ratio than 1998 Haro Mini Blaster.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1998 Haro Mini BlasterSize Legacy reference · 40T · 16T · 1-speed
Ratio2.50:1
Estimated speed at 90 RPMGear13.5 mph

Uses front tire 20×2.1; rear size isn’t listed.

1997 Haro Mini BlasterSize Legacy reference · 32T · 16T · 1-speed
Ratio2.00:1
Estimated speed at 90 RPMGear8.3 mph

Uses front tire 16×1.75; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1998 Haro Mini Blaster
1997 Haro Mini Blaster
Overview
Model Year
1998
1997
Brand
Haro
Haro
Model
Mini Blaster
Mini Blaster
Bicycle Type
Juvenile
Juvenile
Original MSRP
$145.00
$140.00
Colors
Chrome-plated, Purple
Chrome-plated
Sizes
Boys 9"
Boys
Weight
25 lb
25 lb
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Hi-tensile steel
Hi-tensile steel
Fork
Haro
Haro
Fork Material
Hi-tensile steel, unicrown crown
Hi-tensile steel, unicrown crown
Drivetrain
Crankset
1-piece 6 1/2", 40 teeth
Fusion 1-piece, 32 teeth
Bottom Bracket
One piece
Victor
BB Shell Width
American
68mm Threadless
Rear Cogs
1-speed, 16 teeth
1-speed, 16 teeth
Chain
KMC 410, 1/2 x 1/8"
KMC, 1/2 x 1/8"
Pedals
Platform, resin
Xerama SP-48
Brakes
Brakes
Kung Ten coaster/Chang Star 852A rear brakes, Chang Star levers
Coaster brake
Cockpit & Contact Points
Headset
1" YST steel
1" Tien Hsin
Handlebar
Haro
Haro
Stem
Fusion
Fusion
Saddle
Viscount 2963
Haro
Seatpost
Fusion, 22.2mm (7/8 inch) diameter
Fusion, 22.2 mm (7/8 inch) diameter
Wheels & Tires
Hubs
Front: Jou Yu steel, nutted, Rear: Kung Ten coaster
Front: Joy Tech aluminum, nutted, Rear: Kung Ten coaster brake
Rims
Araya VP-20, 36-hole
CMC 7X steel, 28-hole
Spokes
Steel, 2.0mm straight gauge
HTI steel, 2.0mm straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
20 x 2.10" Haro Holeshot II
16 x 1.75" Kenda K-50 Comp III type
Wheel Size
20" wheels
16" wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
70°
70°
Seat-tube angle
71°
70°
Chainstay / rear center
393.7 mm
289.6 mm
Wheelbase
882.6 mm
726.4 mm
Fork offset / rake
38 mm
32 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Scroll to Top