Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Gearing

    1998 Alpine Designs XC-Sport has a 8% lower climbing ratio than 1997 Alpine Designs XC-Sport.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1998 Alpine Designs XC-SportSize Legacy reference · 42/32/22T · 11–28T · 7-speed
Lowest0.79:1Highest3.82:1Total range486%
Estimated speed at 90 RPMLowest gear5.5 mphHighest gear26.8 mph

Uses front tire 26×2.1; rear size isn’t listed.

1997 Alpine Designs XC-SportSize Legacy reference · 42/34/24T · 11–28T · 7-speed
Lowest0.86:1Highest3.82:1Total range445%
Estimated speed at 90 RPMLowest gear6.0 mphHighest gear26.8 mph

Uses front tire 26×2.1; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1998 Alpine Designs XC-Sport
1997 Alpine Designs XC-Sport
Overview
Model Year
1998
1997
Brand
Alpine Designs
Alpine Designs
Model
XC-Sport
XC-Sport
Bicycle Type
Mountain bike, non-suspension
Mountain bike, front suspension
Original MSRP
$449.00
$399.99
Colors
Electric Purple, Real Red
Electric purple
Sizes
14", 16.5", 18.5", 19.5", 21"
14.5", 16.5", 18.5", 19.5"
Weight
28 lb
27.5 lb
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
4130 chromoly
Chromoly, double-butted, oversize
Fork
Alpine Designs
Akisu
Fork Material
Chromoly/hi-tensile steel, unicrown crown
Chromoly, unicrown crown
Drivetrain
Component Group
Mountain Mix
Shimano AceraX
Shifters
Grip Shift MRX-170
Grip Shift SRT-400i
Front Derailleur
Shimano AceraX top-swing, top-pull
Shimano AceraX top-swing, top-pull/clamp-on 31.8 mm
Rear Derailleur
Shimano AceraX
Shimano AceraX
Crankset
Shimano AceraX, 22/32/42 teeth
Shimano AceraX, 24/34/42 teeth
Bottom Bracket
Shimano BB-CT91, 113mm spindle
Shimano BB-LP26, 113 mm spindle
BB Shell Width
68mm English
68mm English
Rear Cogs
7-speed, 11 - 28 teeth
7-speed, 11 - 28 teeth
Chain
KMC UG-50, 1/2 x 3/32"
KMC UG-50, 1/2 x 3/32"
Pedals
Wellgo LU-895
Aluminum
Brakes
Brakes
Shimano AceraX M-System brakes, Shimano AceraX levers
Shimano Altus brakes, Shimano Tourney TY-21 levers
Cockpit & Contact Points
Headset
1 1/8" threadless Dia-Tech steel
1 1/8" threadless Dia-Compe Kontak Aheadset ST-2
Handlebar
Fly Up-Rising
Leadtec
Handlebar Extensions
Not included
Not included
Stem
Kalloy chromoly
Chromoly
Saddle
Viscount 2350 w/springs
Velo VL-195
Seatpost
Kalloy SP-200, 29.6mm diameter
Kalloy SP-242, 29.6 mm diameter
Wheels & Tires
Hubs
Shimano AceraX
Shimano AceraX
Rims
Sun Rims CR18, 36-hole
Sumo TR300, 32-hole
Spokes
Wheelsmith stainless steel, 2.0mm straight gauge
Asahi stainless steel, 2.0mm straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
26 x 2.10" Fly Accelerator
26 x 2.10" Fly Accelerator
Wheel Size
26" wheels
26" wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
71°
71°
Seat-tube angle
73°
73°
Chainstay / rear center
425.4 mm
425.4 mm
Wheelbase
—
1061.7 mm
Fork offset / rake
38.1 mm
—

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Sponsored affiliate link
Scroll to Top