Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. No key difference could be established from the available data. Check the full table for the details.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1997 Python AnacondaSize Legacy reference · 48/38/28T · 14–28T · 6-speed
Lowest1.00:1Highest3.43:1Total range343%
Estimated speed at 90 RPMLowest gear6.9 mphHighest gear23.8 mph

Uses front tire 26×1.95; rear size isn’t listed.

1996 Python AnacondaSize Legacy reference · 48/38/28T · 14–28T · 6-speed
Lowest1.00:1Highest3.43:1Total range343%
Estimated speed at 90 RPMLowest gear6.9 mphHighest gear23.8 mph

Uses front tire 26×1.95; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1997 Python Anaconda
1996 Python Anaconda
Overview
Model Year
1997
1996
Brand
Python
Python
Model
Anaconda
Anaconda
Bicycle Type
Mountain bike, non-suspension
Mountain bike, non-suspension
Original MSRP
$219.95
$219.95
Colors
Green
Green
Sizes
16", 18", 20", 22"
16", 18", 20", 22"
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded steel
Frame Material
Chromoly seat tube/hi-tensile steel
Chromoly seat tube/hi-tensile steel
Fork
Python
Python
Fork Material
Hi-tensile steel, unicrown crown
Hi-tensile steel, unicrown crown
Drivetrain
Component Group
Shimano Tourney TY-20
Shimano Tourney TY-20
Shifters
Grip Shift Quickshift
Grip Shift Quickshift
Front Derailleur
Shimano Tourney TY-25, bottom-pull
Shimano Tourney TY-25, bottom-pull
Rear Derailleur
Shimano Tourney TY-20
Shimano Tourney TY-20
Crankset
Prowheel S-345, 28/38/48 teeth
Prowheel S-345, 28/38/48 teeth
Bottom Bracket
Chin Haur CH-32, 116 mm spindle
Chin Haur CH-32, 116 mm spindle
BB Shell Width
68mm English
68mm English
Rear Cogs
6-speed, 14 - 28 teeth
6-speed, 14 - 28 teeth
Chain
KMC HP-20, 1/2 x 3/32"
KMC HP-20, 1/2 x 3/32"
Pedals
CW resin
CW resin
Brakes
Brakes
Aluminum cantilever brakes, resin levers
Alloy w/spring tension adjuster brakes, resin levers
Cockpit & Contact Points
Headset
1" Tien Hsin
1" Tien Hsin TH steel
Handlebar
Python steel
Python steel
Handlebar Extensions
Not included
Not included
Stem
Python steel
Python steel
Saddle
Python
Python
Seatpost
Python steel, 26.4 mm diameter
Python steel, 26.4 mm diameter
Wheels & Tires
Hubs
Front: Sovos sealed mechanism, Q/R, Rear: Sovos cassette Q/R
—
Rims
Python aluminum, 32-hole
Python Alloy, 32-hole
Spokes
Steel, 2.0mm straight gauge
Steel, 1.8mm straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
26 x 1.95" Duro HF-822
26 x 1.95" Duro HF-822
Wheel Size
26" wheels
26" wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
71°
71°
Seat-tube angle
73°
73°
Chainstay / rear center
431.8 mm
431.8 mm
Wheelbase
1035 mm
1035 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Sponsored affiliate link
Scroll to Top