Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Handling

    1996 Norco Katmandu has a 0.5° slacker head-tube angle than 1997 Norco Katmandu in the archived geometry. Frame size is not identified for 1997 Norco Katmandu and 1996 Norco Katmandu.

    Fork offset, tire size and wheelbase also affect steering; head angle alone is not a handling verdict.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1997 Norco KatmanduSize Legacy reference · 46/36/28T · 14–28T · 7-speed
Lowest1.00:1Highest3.29:1Total range329%
Estimated speed at 90 RPMLowest gear6.9 mphHighest gear22.8 mph

Uses front tire 26×1.95; rear size isn’t listed.

1996 Norco KatmanduSize Legacy reference · 46/38/28T · 14–28T · 6-speed
Lowest1.00:1Highest3.29:1Total range329%
Estimated speed at 90 RPMLowest gear6.9 mphHighest gear22.8 mph

Uses front tire 26×1.95; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1997 Norco Katmandu
1996 Norco Katmandu
Overview
Model Year
1997
1996
Brand
Norco
Norco
Model
Katmandu
Katmandu
Bicycle Type
Mountain bike, non-suspension
Mountain bike, non-suspension
Original MSRP
$284.99
$299.00
Colors
Green, Satin
Dark blue, Satin
Sizes
15", 16", 18", 20", 22"
15", 16", 18", 20", 22"
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded steel
Frame Material
Chromoly/hi-tensile steel
Chromoly/hi-tensile steel
Fork
Spinner
Norco
Fork Material
4130 chromoly, unicrown crown
Chromoly, unicrown crown
Drivetrain
Component Group
—
Shimano Tourney TY-30
Shifters
Grip Shift MRX-170
Grip Shift Quickshift
Front Derailleur
Shimano Tourney TY-30, bottom-pull/clamp-on 28.6 mm
Shimano Tourney TY-30, top-pull
Rear Derailleur
Shimano AceraX
Shimano Tourney TY-30
Crankset
Sugino, 28/36/46 teeth
CPI AL-300, 28/38/46 teeth
Bottom Bracket
Chin Haur CH-48, 122.5 mm spindle
Chin Haur CH-30
BB Shell Width
68mm English
68mm English
Rear Cogs
7-speed, 14 - 28 teeth
6-speed, 14 - 28 teeth
Chain
KMC UG-50, 1/2 x 3/32"
KMC UG-50, 1/2 x 3/32"
Pedals
Victor VP-893
Victor VP-893N
Brakes
Brakes
Tektro 868AG brakes, Tektro RBP-371A levers
Chang Star 852AT cantilever brakes, Chang Star 269 levers
Cockpit & Contact Points
Headset
1" Chin Haur CH71-2
1" Chin Haur CH71-2
Handlebar
Hsin Lung MTB 110
Hsin Lung MTB 110
Handlebar Extensions
Not included
L-Bend steel
Stem
Hsin Lung MTS 309
Chromoly
Saddle
Velo VL-578
Velo VL-276
Seatpost
Steel pillar, 25.4 mm diameter
Steel, 25.4 mm diameter
Wheels & Tires
Hubs
Front: Formula FM 11 Q/R, Rear: Formula aluminum, Q/R
—
Rims
Vuelta Strong, 36-hole
Rigida AS-26, 36-hole
Spokes
Steel, 2.0mm straight gauge
Steel, 2.0mm straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
26 x 1.95"
26 x 1.95"
Wheel Size
26" wheels
26" wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
71°
70.5°
Seat-tube angle
73°
73°
Chainstay / rear center
425 mm
431.8 mm
Wheelbase
1064 mm
1066.8 mm
Fork offset / rake
39 mm
38.1 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Scroll to Top