Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Gearing

    1997 Haro Mini Blaster has a 20% lower climbing ratio than 1999 Haro Mini Blaster.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1997 Haro Mini BlasterSize Legacy reference · 32T · 16T · 1-speed
Ratio2.00:1
Estimated speed at 90 RPMGear8.3 mph

Uses front tire 16×1.75; rear size isn’t listed.

1999 Haro Mini BlasterSize Legacy reference · 40T · 16T · 1-speed
Ratio2.50:1
Estimated speed at 90 RPMGear13.0 mph

Rear tire: 20×1.75.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1997 Haro Mini Blaster
1999 Haro Mini Blaster
Overview
Model Year
1997
1999
Brand
Haro
Haro
Model
Mini Blaster
Mini Blaster
Bicycle Type
Juvenile
Juvenile
Original MSRP
$140.00
$140.00
Colors
Chrome-plated
Chrome-Plated, Deep Red
Sizes
Boys
Expert
Weight
25 lb
25.4 lb
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Hi-tensile steel
Hi-tensile steel
Fork
Haro
Haro
Fork Material
Hi-tensile steel, unicrown crown
Hi-tensile steel, unicrown crown
Drivetrain
Crankset
Fusion 1-piece, 32 teeth
Fusion 1-piece, 40 teeth
Bottom Bracket
Victor
Fusion sealed
BB Shell Width
68mm Threadless
American
Rear Cogs
1-speed, 16 teeth
1-speed, 16 teeth
Chain
KMC, 1/2 x 1/8"
KMC 410, 1/2 x 1/8"
Pedals
Xerama SP-48
Resin
Brakes
Brakes
Coaster brake
Chang Star 859/coaster rear brakes, Chang Star 257A rear levers
Cockpit & Contact Points
Headset
1" Tien Hsin
1" YST steel
Handlebar
Haro
Haro
Stem
Fusion
Fusion
Saddle
Haro
Haro padded
Seatpost
Fusion, 22.2 mm (7/8 inch) diameter
Fusion, 22.2mm (7/8 inch) diameter
Wheels & Tires
Hubs
Front: Joy Tech aluminum, nutted, Rear: Kung Ten coaster brake
Front: Joy Tech steel, nutted, Rear: Kung Ten coaster
Rims
CMC 7X steel, 28-hole
Haro RC3, 36-hole
Spokes
HTI steel, 2.0mm straight gauge
Steel, 2.0mm straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
16 x 1.75" Kenda K-50 Comp III type
20 x 2.10" Haro Holeshot II
Rear Tire
—
20 x 1.75" Haro Holeshot II
Wheel Size
16" wheels
20" wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
70°
70°
Seat-tube angle
70°
71°
Chainstay / rear center
289.6 mm
393.7 mm
Wheelbase
726.4 mm
881.4 mm
Fork offset / rake
32 mm
38.1 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Scroll to Top