Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Identity & price

    These bicycles are categorized differently: 1997 Norco Magnum is Mountain; 1995 Norco Magnum is Road.

  2. Handling

    1997 Norco Magnum has a 2.0° slacker head-tube angle than 1995 Norco Magnum in the archived geometry. Frame size is not identified for 1997 Norco Magnum and 1995 Norco Magnum.

    Fork offset, tire size and wheelbase also affect steering; head angle alone is not a handling verdict.

  3. Gearing

    1997 Norco Magnum has a 21% lower climbing ratio than 1995 Norco Magnum.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

  4. Identity & price

    1995 Norco Magnum had an original MSRP $241 lower than 1997 Norco Magnum.

    Original MSRP is the published list price when new, not today’s used-bike value.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1997 Norco MagnumSize Legacy reference · 42/34/24T · 11–28T · 8-speed
Lowest0.86:1Highest3.82:1Total range445%
Estimated speed at 90 RPMLowest gear6.0 mphHighest gear26.8 mph

Rear tire: 26×2.1.

1995 Norco MagnumSize Legacy reference · 46/36/26T · 11–24T · 7-speed
Lowest1.08:1Highest4.18:1Total range386%
Estimated speed at 90 RPMLowest gear7.7 mphHighest gear29.6 mph

Uses front tire 700C×25; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1997 Norco Magnum
1995 Norco Magnum
Overview
Model Year
1997
1995
Brand
Norco
Norco
Model
Magnum
Magnum
Bicycle Type
Mountain bike, front suspension
Road/sport
Original MSRP
$719.99
$479.00
Colors
Silver
Burgundy
Sizes
15", 17", 18.5", 20", 22"
52 cm, 55 cm, 58 cm, 61 cm
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded steel
Frame Material
7005 aluminum, butted
Chromoly, double-butted, main triangle
Fork
Marzocchi Zokes II
Aero Blade
Fork Material
Aluminum/chromoly, triple-clamp crown
Chromoly, unicrown crown
Drivetrain
Component Group
—
Shimano RSX
Shifters
Grip Shift SRT-400i
Shimano RX-100 down-tube
Front Derailleur
Shimano Alivio top-swing, top-pull/clamp-on 31.8 mm
Shimano RSX (triple), bottom-pull
Rear Derailleur
Shimano Deore LX SGS
Shimano RSX
Crankset
Sugino Impel 250, 24/34/42 teeth
Sugino Fuse 500, 26/36/46 teeth
Bottom Bracket
Shimano BB-LP26, 110 mm spindle
—
BB Shell Width
68mm English
—
Rear Cogs
8-speed, 11 - 28 teeth
7-speed, 11 - 24 teeth
Chain
KMC SS-91S, 1/2 X 3/32"
KMC UG 50, 1/2 x 3/32"
Pedals
Victor VP-988 w/clips & straps
Victor VP-333S
Brakes
Brakes
Shimano Altus brakes, Shimano Alivio levers
Dia-Compe VX brakes, Dia-Compe VX levers
Cockpit & Contact Points
Headset
1 1/8" threadless Tange
1" YST 800
Handlebar
Axiom
Hsin Lung DR-8
Handlebar Extensions
Not included
—
Stem
Axiom 6061 Comp
LCS-759
Saddle
Velo VL-285
Velo
Seatpost
Axiom Comp, 27.2 mm diameter
Kalloy SP-243, 26.4 mm diameter
Wheels & Tires
Hubs
Formula OV 31
Shimano RSX
Rims
Sun Rims CR18, 32-hole
Vuelta
Spokes
Steel, 2.0mm straight gauge
Stainless steel
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
26 x 2.10" Panaracer Dart
700 x 25c Kenda
Rear Tire
26 x 2.10" Panaracer Smoke
—
Wheel Size
26" wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
71°
73°
Seat-tube angle
73°
73.5°
Chainstay / rear center
425 mm
405 mm
Wheelbase
1064 mm
994 mm
Fork offset / rake
39 mm
45 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Scroll to Top