Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Data limitation

    No geometry is recorded for 2000 Cannondale R4000.

  2. Identity & price

    1997 Cannondale R4000 had an original MSRP $543 lower than 2000 Cannondale R4000.

    Original MSRP is the published list price when new, not today’s used-bike value.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1997 Cannondale R4000Size Legacy reference · 53/39T · 12–23T · 9-speed
Lowest1.70:1Highest4.42:1Total range260%
Estimated speed at 90 RPMLowest gear11.9 mphHighest gear31.1 mph

Uses front tire 700C×23; rear size isn’t listed.

2000 Cannondale R400053/39T · 11–23T · 9-speed
Lowest1.70:1Highest4.82:1Total range284%
Estimated speed at 90 RPMLowest gear11.9 mphHighest gear33.9 mph

Uses front tire 700C×23; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1997 Cannondale R4000
2000 Cannondale R4000
Overview
Model Year
1997
2000
Brand
Cannondale
Cannondale
Model
R4000
R4000
Bicycle Type
Road race & triathlon
Road race & triathlon
Original MSRP
$2,708.99
$3,251.99
Colors
Yellow
Fire Road Red
Sizes
48 cm, 50 cm, 52 cm, 54 cm, 56 cm, 58 cm, 60 cm, 63 cm
48cm, 50cm, 52cm, 54cm, 56cm, 58cm, 60cm, 63cm
Weight
18.1 lb
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
6061 T6 aluminum, double-butted, heat-treated
6061 T6 aluminum
Fork
Cannondale
Cannondale Slice
Fork Material
Carbon fiber composite, aero crown
Carbon fiber composite, unicrown crown
Drivetrain
Component Group
Shimano Dura-Ace
Mavic Mektronic
Shifters
Shimano Dura-Ace STI Dual Control
Mavic Mektronic
Front Derailleur
Shimano Dura-Ace, bottom-pull/braze-on
Shimano Dura-Ace
Rear Derailleur
Shimano Dura-Ace
Mavic Mektronic
Crankset
Shimano Dura-Ace, 39/53 teeth
Shimano Dura-Ace, 39/53 teeth
Bottom Bracket
Shimano BB-7700, 109.5 mm spindle
Shimano BB-7700
BB Shell Width
68mm English
—
Rear Cogs
9-speed, 12 - 23 teeth
9-speed, 11 - 23 teeth
Chain
Shimano CN-7700, 1/2 x 3/32"
SRAM PC-89R, 1/2 X 3/32"
Pedals
Not included
Not included
Brakes
Brakes
Shimano Dura-Ace Dual Pivot brakes, Shimano Dura-Ace levers
Shimano Dura-Ace Dual Pivot brakes, Mavic Mektronic levers
Cockpit & Contact Points
Headset
1" Shimano Dura-Ace
1" threadless Cane Creek C2
Handlebar
Profile Hammer
Cinelli Nerve
Handlebar Extensions
—
Not included
Stem
Chromoly
Time Composite
Saddle
CODA 1000, titanium rails
CODA Competition
Seatpost
Syncros titanium, 27.2 mm diameter
Thomson Elite Offset
Wheels & Tires
Hubs
Shimano Dura-Ace
Front: CODA Competition, Rear: Hugi 240
Rims
Mavic CXP 30, 24-hole
Mavic Open Pro, 28-hole
Spokes
DT stainless steel, 1.8mm straight gauge
DT stainless steel, 2.0mm double-butted
Spoke Nipples
Alloy nipples
Alloy nipples
Front Tire
700 x 23c Continental Grand Prix kevlar
700 x 23c Michelin Axial Pro
Wheel Size
700c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
73°
—
Seat-tube angle
73.5°
—
Chainstay / rear center
406 mm
—
Wheelbase
991 mm
—
Fork offset / rake
43.2 mm
—

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Scroll to Top