Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Handling

    1999 Cannondale Multisport 4000 has a 0.5° slacker head-tube angle than 1997 Cannondale Multisport 4000 in the archived geometry. Frame size is not identified for 1997 Cannondale Multisport 4000 and 1999 Cannondale Multisport 4000.

    Fork offset, tire size and wheelbase also affect steering; head angle alone is not a handling verdict.

  2. Identity & price

    1997 Cannondale Multisport 4000 had an original MSRP $325 lower than 1999 Cannondale Multisport 4000.

    Original MSRP is the published list price when new, not today’s used-bike value.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1997 Cannondale Multisport 4000Size Legacy reference · 53/39T · 11–21T · 8-speed
Lowest1.86:1Highest4.82:1Total range259%
Estimated speed at 90 RPMLowest gear13.1 mphHighest gear33.9 mph

Uses front tire 700C×23; rear size isn’t listed.

1999 Cannondale Multisport 4000Size Legacy reference · 53/39T · 11–21T · 9-speed
Lowest1.86:1Highest4.82:1Total range259%
Estimated speed at 90 RPMLowest gear12.1 mphHighest gear31.3 mph

Uses front tire 650C×23; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1997 Cannondale Multisport 4000
1999 Cannondale Multisport 4000
Overview
Model Year
1997
1999
Brand
Cannondale
Cannondale
Model
Multisport 4000
Multisport 4000
Bicycle Type
Road race & triathlon
Road race & triathlon
Original MSRP
$2,708.99
$3,034.00
Colors
Mango
Industrial Fade
Sizes
48 cm, 50 cm, 52 cm, 54 cm, 56 cm, 58 cm, 60 cm, 62 cm
48cm, 50cm, 52cm, 54cm, 56cm, 58cm, 60cm, 62cm
Weight
19.8 lb
20.6 lb
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
6061 T6 aluminum
6061 T6 aluminum
Fork
Cannondale Headshock DD15
Kinesis Air Foil
Fork Material
Aluminum, unicrown crown
Carbon fiber composite, aero crown
Drivetrain
Component Group
Shimano Dura-Ace
Shimano Dura-Ace
Shifters
Shimano Dura-Ace STI Dual Control
Shimano Ultegra bar-end
Front Derailleur
Shimano Dura-Ace, bottom-pull/braze-on
Shimano Dura-Ace, bottom-pull/clamp-on 31.8mm
Rear Derailleur
Shimano Dura-Ace
Shimano Dura-Ace
Crankset
Shimano Dura-Ace, 39/53 teeth
Shimano Dura-Ace, 39/53 teeth
Bottom Bracket
Shimano BB-7410, 103 mm spindle
Shimano BB-7700, 109.5mm spindle
BB Shell Width
68mm English
68mm English
Rear Cogs
8-speed, 11 - 21 teeth
9-speed, 11 - 21 teeth
Chain
Shimano CN-7401, 1/2 x 3/32"
Shimano CN-7700, 1/2 x 3/32"
Pedals
Not included
Not included
Brakes
Brakes
Shimano Dura-Ace Dual Pivot brakes, Shimano Dura-Ace levers
Shimano Dura-Ace Dual Pivot brakes, Dia-Compe 287 levers
Cockpit & Contact Points
Headset
1" CODA HeadShok
1" Shimano Dura-Ace
Handlebar
Profile Hammer
Syntace Stratos
Handlebar Extensions
Syntace C-2
Syntace C-2
Stem
CODA HeadShok
CODA Front Loader aluminum
Saddle
CODA 1000, titanium rails
CODA Competition Road, titanium rails
Seatpost
Syncros titanium, 27.2 mm diameter
Thomson Elite, 27.2mm diameter
Wheels & Tires
Hubs
Shimano Dura-Ace
Shimano Dura-Ace
Rims
Mavic Cosmic Pro
Spinergy Rev-X X-tra Lite
Spokes
Carbon fiber, molded
Spinergy carbon fiber, molded
Front Tire
700 x 23c Continental Grand Prix kevlar
650 x 23c Continental Grand Prix kevlar
Wheel Size
700c wheels
650c wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
73°
72.5°
Seat-tube angle
73.5°
77°
Chainstay / rear center
406 mm
380 mm
Wheelbase
991 mm
1002 mm
Fork offset / rake
46 mm
35 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Scroll to Top