- Frame
- Chromoly main triangle/hi-tensile steel rear stays
- Groupset
- Shimano Alivio/AceraX
Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Handling
1997 GT Outpost has a 0.5° slacker head-tube angle than 1999 GT Outpost in the archived geometry. Frame size is not identified for 1997 GT Outpost and 1999 GT Outpost.
Fork offset, tire size and wheelbase also affect steering; head angle alone is not a handling verdict.
- Gearing
1997 GT Outpost has a 14% lower climbing ratio than 1999 GT Outpost.
A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
Uses front tire 26×2.1; rear size isn’t listed.
Uses front tire 26×2.1; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.