Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Data limitation

    No geometry is recorded for 1996 Scott Comp Jr.

  2. Gearing

    1997 Scott Comp Jr has a 6% lower climbing ratio than 1996 Scott Comp Jr.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1997 Scott Comp JrSize Legacy reference · 42/34T · 14–28T · 5-speed
Lowest1.21:1Highest3.00:1Total range247%
Estimated speed at 90 RPMLowest gear6.3 mphHighest gear15.7 mph

Uses front tire 20×1.75; rear size isn’t listed.

1996 Scott Comp Jr42/36T · 14–28T · 5-speed
Lowest1.29:1Highest3.00:1Total range233%
Estimated speed at 90 RPMLowest gear6.9 mphHighest gear16.0 mph

Rear tire: 20×1.95.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1997 Scott Comp Jr
1996 Scott Comp Jr
Overview
Model Year
1997
1996
Brand
Scott
Scott
Model
Comp Jr
Comp Jr
Bicycle Type
Juvenile
Juvenile
Original MSRP
$269.00
$260.99
Colors
Yellow/orange
Yellow/magenta
Sizes
Boys, girls
Boys 11"
Weight
30 lb
—
Frameset
Frame Construction
Welded
TIG-welded steel
Frame Material
Hi-tensile steel
Hi-tensile steel
Fork
Spinner
Scott
Fork Material
Hi-tensile steel, unicrown crown
Hi-tensile steel, unicrown crown
Drivetrain
Component Group
Shimano Tourney TY-15
Shimano Tourney TY-15
Shifters
Grip Shift MRX-170
Grip Shift Quickshift
Front Derailleur
Shimano Tourney TY-15, bottom-pull/clamp-on 28.6 mm
Shimano Tourney TY-15, bottom-pull
Rear Derailleur
Shimano Tourney TY-15
Shimano Tourney TY-25
Crankset
Dotek DK1-70P, 34/42 teeth
36/42 teeth
Bottom Bracket
Chin Haur CH-46
Chin Haur CH-46
BB Shell Width
68mm English
68mm English
Rear Cogs
5-speed, 14 - 28 teeth
5-speed, 14 - 28 teeth
Chain
KMC UG-50, 1/2 x 3/32"
1/2 x 3/32"
Pedals
Victor VP-893
Victor VP-260N
Brakes
Brakes
Chang Star 852AT cantilever brakes, aluminum levers
Chang Star 852AT cantilever
Cockpit & Contact Points
Headset
1" Victor VP-H83 sealed
1" Victor VP-H83 sealed
Handlebar
Hi-tensile steel
—
Handlebar Extensions
Aluminum
—
Stem
Hi-tensile steel
—
Saddle
Scott Junior
Scott Junior
Seatpost
Aluminum, 26.0 mm diameter
25.6 mm diameter
Wheels & Tires
Hubs
Steel, nutted
—
Rims
Alex VP-20, 36-hole
Alloy, 36-hole
Spokes
Steel, 2.0mm straight gauge
Steel, 2.0mm straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
20 x 1.75" Kenda
20 x 1.75" Kenda K-831
Rear Tire
—
20 x 1.95" Kenda K-831
Wheel Size
20" wheels
20" wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
70.3°
—
Seat-tube angle
71°
—
Chainstay / rear center
365.8 mm
—
Wheelbase
868.7 mm
—
Fork offset / rake
40.6 mm
—

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Campaign
Scroll to Top