Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Handling

    1994 Nishiki Pinnacle has a 0.5° slacker head-tube angle than 1997 Nishiki Pinnacle in the archived geometry. Frame size is not identified for 1997 Nishiki Pinnacle and 1994 Nishiki Pinnacle.

    Fork offset, tire size and wheelbase also affect steering; head angle alone is not a handling verdict.

  2. Gearing

    1997 Nishiki Pinnacle has a 7% lower climbing ratio than 1994 Nishiki Pinnacle.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

  3. Identity & price

    1997 Nishiki Pinnacle had an original MSRP $245 lower than 1994 Nishiki Pinnacle.

    Original MSRP is the published list price when new, not today’s used-bike value.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1997 Nishiki PinnacleSize Legacy reference · 42/32/22T · 11–30T · 8-speed
Lowest0.73:1Highest3.82:1Total range521%
Estimated speed at 90 RPMLowest gear5.2 mphHighest gear26.8 mph

Uses front tire 26×2.1; rear size isn’t listed.

1994 Nishiki PinnacleSize Legacy reference · 42/32/22T · 11–28T · 8-speed
Lowest0.79:1Highest3.82:1Total range486%

Speed unavailable: wheel or tire size is missing or unclear.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1997 Nishiki Pinnacle
1994 Nishiki Pinnacle
Overview
Model Year
1997
1994
Brand
Nishiki
Nishiki
Model
Pinnacle
Pinnacle
Bicycle Type
Mountain bike, front suspension
Mountain bike, front suspension
Original MSRP
$799.99
$1,045.00
Colors
Black
—
Sizes
16", 18", 20", 22"
13", 17", 19", 21"
Weight
27 lb
26.7 lb
Frameset
Frame Construction
TIG-welded
TIG-welded steel
Frame Material
7005 aluminum, oversize
Chromoly, double-butted
Fork
Rock Shox Indy XC
Rock Shox Mag 10
Fork Material
Magnesium, triple-clamp crown
—
Drivetrain
Component Group
Shimano Deore LX/STX
Shimano Deore XT / GripShift
Shifters
Shimano STX-RC RapidFire SL
Grip Shift SRT-500
Front Derailleur
Shimano STX-RC top-swing, top-pull/clamp-on 31.8 mm
Shimano STX
Rear Derailleur
Shimano Deore LX SGS
XT
Crankset
Sugino Impel 500, 22/32/42 teeth
Shimano Deore LX, 22/32/42 teeth
Bottom Bracket
Shimano BB-LP26, 110 mm spindle
—
BB Shell Width
68mm English
—
Rear Cogs
8-speed, 11 - 30 teeth
8-speed, 11 - 28 teeth
Chain
KMC SS-91S, 1/2 X 3/32"
Shimano HG-90
Pedals
Aluminum cage w/clips & straps
Wellgo LU-934 w/clips
Brakes
Brakes
Shimano Deore LX V-Brake brakes, Shimano Deore LX levers
Shimano Alivio brakes, levers
Cockpit & Contact Points
Headset
1 1/8" Tange-Seiki ST-E
—
Handlebar
Aluminum
Sameness MB268-L
Handlebar Extensions
Aluminum
—
Stem
Aluminum
Sameness MS-141S-8 AheadSet
Saddle
Selle Bassano Vuelta, chromoly rails
Vetta SP, manganese rails, leather cover
Seatpost
Aluminum micro-adjust, 27.2 mm diameter
Kalloy SP-248 350mm
Wheels & Tires
Hubs
Front: Shimano Deore LX suspension, Rear: Shimano Deore LX
XT RR / STX FT
Rims
Weinmann Zac 19, 32-hole
Sun Metal CR-16, 32-hole
Spokes
Stainless steel, 1.8mm straight gauge
—
Spoke Nipples
Brass nipples
—
Front Tire
26 x 2.10" IRC Mythos XC
Panaracer Dart
Rear Tire
—
Panaracer Smoke
Wheel Size
26" wheels
—
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
71°
70.5°
Seat-tube angle
73°
73°
Chainstay / rear center
425.4 mm
425.4 mm
Wheelbase
1064.3 mm
1064.3 mm
Fork offset / rake
40.6 mm
76.2 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Sponsored affiliate link
Scroll to Top