Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Data limitation

    No geometry is recorded for 1995 Norco Bush Pilot.

  2. Gearing

    1995 Norco Bush Pilot has a 14% lower climbing ratio than 1996 Norco Bush Pilot.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1996 Norco Bush PilotSize Legacy reference · 46/38/28T · 13–28T · 7-speed
Lowest1.00:1Highest3.54:1Total range354%
Estimated speed at 90 RPMLowest gear6.9 mphHighest gear24.6 mph

Uses front tire 26×1.95; rear size isn’t listed.

1995 Norco Bush Pilot48/32/24T · 11–28T · 7-speed
Lowest0.86:1Highest4.36:1Total range509%
Estimated speed at 90 RPMLowest gear6.0 mphHighest gear30.3 mph

Uses front tire 26×1.95; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1996 Norco Bush Pilot
1995 Norco Bush Pilot
Overview
Model Year
1996
1995
Brand
Norco
Norco
Model
Bush Pilot
Bush Pilot
Bicycle Type
Mountain bike, non-suspension
Mountain bike, non-suspension
Original MSRP
$339.00
$329.00
Colors
Red, Silver
Laser red, Teal, Violet
Sizes
15", 16", 18", 20", 22"
15", 16", 18", 20", 22", womens 17", womens 19"
Weight
—
—
Frameset
Frame Construction
TIG-welded steel
TIG-welded steel
Frame Material
Chromoly/hi-tensile steel
Chromoly
Fork
Norco
Radius tapered
Fork Material
Chromoly, unicrown crown
Chromoly
Drivetrain
Component Group
—
Shimano Altus C90
Shifters
Grip Shift MRX-100
Grip Shift MRX-100
Front Derailleur
Shimano Tourney TY-22, top-pull
Shimano Altus C90, bottom-pull
Rear Derailleur
Shimano AceraX
Shimano AceraX
Crankset
CPI AL-300, 28/38/46 teeth
Shimano Altus C90, 24/32/48 teeth
Bottom Bracket
Chin Haur CH-30
—
BB Shell Width
68mm English
—
Rear Cogs
7-speed, 13 - 28 teeth
7-speed, 11 - 28 teeth
Chain
KMC UG-50, 1/2 x 3/32"
KMC UG 50, 1/2 x 3/32"
Pedals
Victor VP-893N
Victor VP-893N
Brakes
Brakes
Chang Star 852AT cantilever brakes, Tektro 371A levers
Shimano Altus C90 brakes, Tektro Resin levers
Cockpit & Contact Points
Headset
1" Chin Haur CH71-2
1" YST 622
Handlebar
Hsin Lung MTB 110
Hsin Lung
Handlebar Extensions
L-Bend steel
L bend
Stem
Chromoly
Hsin Lung alloy
Saddle
Velo VL-276
Velo VL-169EM
Seatpost
Steel, 26.4 mm diameter
25.4 mm diameter
Wheels & Tires
Hubs
—
Shimano Alivio
Rims
Rigida AS-26, 36-hole
Rigida alloy
Spokes
Steel, 2.0mm straight gauge
—
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
26 x 1.95"
26 x 1.95" Kenda
Wheel Size
26" wheels
26" wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
70.5°
—
Seat-tube angle
73°
—
Chainstay / rear center
431.8 mm
—
Wheelbase
1066.8 mm
—
Fork offset / rake
38.1 mm
—

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Scroll to Top