Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Data limitation

    No geometry is recorded for 1996 Schwinn Cruiser Deluxe and 1998 Schwinn Cruiser Deluxe.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1996 Schwinn Cruiser Deluxe46T · 22T · 1-speed
Ratio2.09:1
Estimated speed at 90 RPMGear14.7 mph

Uses front tire 26×2.125; rear size isn’t listed.

1998 Schwinn Cruiser Deluxe46T · 22T · 1-speed
Ratio2.09:1
Estimated speed at 90 RPMGear14.7 mph

Uses front tire 26×2.125; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1996 Schwinn Cruiser Deluxe
1998 Schwinn Cruiser Deluxe
Overview
Model Year
1996
1998
Brand
Schwinn
Schwinn
Model
Cruiser Deluxe
Cruiser Deluxe
Bicycle Type
Cruiser
Cruiser
Original MSRP
$439.95
$479.95
Colors
Red/black, Silver/Black
Green/Cream
Sizes
18"
18"
Weight
—
—
Frameset
Frame Construction
TIG-welded steel
Welded
Frame Material
Hi-tensile steel
Hi-tensile steel
Fork
Schwinn Phantom Springer, adjustable
Schwinn Phantom Springer
Fork Material
Hi-tensile steel
Hi-tensile steel, unicrown crown
Drivetrain
Component Group
Shimano Coaster
—
Crankset
1-piece 6 1/2", 46 teeth
Schwinn 1-piece, 46 teeth
Bottom Bracket
One piece
—
BB Shell Width
68mm Threadless
—
Rear Cogs
1-speed, 22 teeth
1-speed, 22 teeth
Chain
1/2 x 1/8"
1/2 x 1/8"
Pedals
Schwinn Phantom, rubber-block
Schwinn Phantom rubber-block
Brakes
Brakes
Shimano coaster brake
Shimano coaster brake
Cockpit & Contact Points
Headset
1" steel
1" steel
Handlebar
Steel
Schwinn Classic Cruiser steel
Stem
Schwinn Phantom, forged steel
Schwinn Phantom forged
Saddle
Cruiser w/springs
Schwinn Classic Padded 3-spring
Seatpost
Steel, 22.2 mm (7/8 inch) diameter
Pillar, steel
Wheels & Tires
Hubs
—
Front: Formula steel, Rear: Shimano coaster
Rims
Steel, 36-hole
Steel, 36-hole
Spokes
105g straight gauge
Stainless steel, 105g straight gauge
Spoke Nipples
Brass nipples
—
Front Tire
26 x 2.125" Schwinn
26 x 2.125" Schwinn Classic
Wheel Size
26" wheels
26" wheels

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run.

Sponsored affiliate link
Scroll to Top