- Frame
- Chromoly, double-butted
- Fork
- Spinner
Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
No key difference could be established from the available data. Check the full table for the details.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Ratio3.00:1
Estimated speed at 90 RPMGear
Uses front tire 700C×23; rear size isn’t listed.
Ratio3.00:1
Estimated speed at 90 RPMGear
Uses front tire 700C×23; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
1996 KHS Aero Track
1998 KHS Aero Track
Overview
Model Year
1996
1998
Brand
KHS
KHS
Model
Aero Track
Aero Track
Bicycle Type
Track
Track
Original MSRP
$649.00
$649.00
Colors
Silver
Silver
Sizes
S, M, L
S, M, L
Weight
17.5 lb
17.5 lb
Frameset
Frame Construction
TIG-welded steel
TIG-welded
Frame Material
Chromoly, double-butted
Chromoly
Fork
Spinner
Spinner
Fork Material
Chromoly, forged dropouts, aero crown
Chromoly, unicrown crown
Drivetrain
Crankset
Sugino Mighty SG-75, 48 teeth
Sugino Mighty 900, 48 teeth
Bottom Bracket
Shimano BB-LP26, 110 mm spindle
Shimano BB-UN52
BB Shell Width
68mm English
68mm English
Rear Cogs
1-speed, 16 teeth
1-speed, 16 teeth
Chain
Shimano CN-HG50, 1/2 x 3/32"
Shimano CN-HG50, 1/2 x 3/32"
Pedals
Victor VP-333
Victor VP-333A
Cockpit & Contact Points
Headset
1" Tien Hsin TH-3600
1" Tien Hsin TH-3600
Handlebar
Hsin Lung Modolo bend
Hsin Lung aluminum
Stem
Kalloy alloy
Kalloy aluminum
Saddle
Velo VL-195
Velo VL-273-3
Seatpost
Kalloy SP-263, 27.2 mm diameter
Kalloy SP-263, 26.8mm diameter
Wheels & Tires
Hubs
—
Kung Ten aluminum, nutted
Rims
Sun Metal M14A, 36-hole
Sun Rims ME14A, 36-hole
Spokes
Stainless steel, 2.0mm straight gauge
Shuhn Lih stainless steel, 2.0mm straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
700 x 23c Cheng Shin C-740
700 x 23c Cheng Shin C-740
Wheel Size
700c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
74°
74°
Seat-tube angle
74°
74°
Chainstay / rear center
387 mm
387 mm
Wheelbase
951 mm
950 mm
Fork offset / rake
25 mm
63.5 mm
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.