Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Data limitation

    No geometry is recorded for 1999 Easy Racer EZ-1.

  2. Gearing

    1999 Easy Racer EZ-1 has a 12% lower climbing ratio than 1996 Easy Racer EZ-1.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

  3. Identity & price

    1996 Easy Racer EZ-1 had an original MSRP $174 lower than 1999 Easy Racer EZ-1.

    Original MSRP is the published list price when new, not today’s used-bike value.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

1996 Easy Racer EZ-1Size Legacy reference · 53/46/34T · 13–28T · 6-speed
Lowest1.21:1Highest4.08:1Total range336%

Speed unavailable: wheel or tire size is missing or unclear.

1999 Easy Racer EZ-152/46/32T · 11–30T · 7-speed
Lowest1.07:1Highest4.73:1Total range443%

Speed unavailable: wheel or tire size is missing or unclear.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1996 Easy Racer EZ-1
1999 Easy Racer EZ-1
Overview
Model Year
1996
1999
Brand
Easy Racer
Easy Racer
Model
EZ-1
EZ-1
Bicycle Type
Recumbent
Recumbent
Original MSRP
$795.00
$969.00
Colors
Black, Red
Ferrari Red, Jet Black
Sizes
M, L
M, L
Weight
28.9 lb
28.9 lb
Frameset
Frame Construction
TIG-welded steel
TIG-welded
Frame Material
Chromoly/hi-tensile steel
Chromoly/hi-tensile steel
Fork
Spinner
Spinner
Fork Material
Hi-tensile steel, unicrown crown
Hi-tensile steel, unicrown crown
Drivetrain
Component Group
Shimano Altus
Recumbent Mix
Shifters
Shimano Altus top-mount
Grip Shift Centera
Front Derailleur
Shimano Altus top-swing, bottom-pull/clamp-on 28.6 mm
Shimano AceraX top-swing
Rear Derailleur
Shimano Altus
Shimano
Crankset
SR alloy, 34/46/53 teeth
SR SX, 32/46/52 teeth
Bottom Bracket
YST, 122.5 mm spindle
Shimano BB-UN51
BB Shell Width
68mm English
68mm English
Rear Cogs
6-speed, 13 - 28 teeth
7-speed, 11 - 30 teeth
Chain
KMC Alpha 50, 1/2 x 3/32"
Sedis, 1/2 x 3/32"
Pedals
Wellgo LU-895
SR/Sakae Low-fat
Brakes
Brakes
Dia-Compe FS-E brakes, Tektro RBP-365A levers
Shimano cantilever brakes, Tektro RBP-365A levers
Cockpit & Contact Points
Headset
1" YST 300
1" YST
Handlebar
Easy Racer
Easy Racer custom
Stem
SR alloy
Sr
Saddle
Aluminum frame recumbent
Recumbent mesh seat
Wheels & Tires
Hubs
—
Sovos sealed mechanism
Rims
Weinmann alloy, 36-hole
Weinmann
Spokes
Sapim steel, 2.0mm straight gauge
Sapim steel, 2.0mm straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
16" Kenda K-148
16 x 1 3/8"
Rear Tire
20 x 1 3/8" Kenda K-148
20 x 1 3/8"
Wheel Size
Front: 16", Rear: 20" wheels
Front: 16", Rear: 20" wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
63°
—
Wheelbase
1346.2 mm
—
Fork offset / rake
44.4 mm
—

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Sponsored affiliate link
Scroll to Top