- Frame
- Hi-tensile steel
- Brakes
- Coaster brake
Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Data limitation
No geometry is recorded for 1998 Ross Frenzy.
- Gearing
1996 Ross Frenzy has a 28% lower climbing ratio than 1998 Ross Frenzy.
A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Ratio2.44:1
Estimated speed at 90 RPMGear
Uses front tire 20×1.75; rear size isn’t listed.
Ratio3.38:1
Estimated speed at 90 RPMGear
Uses front tire 20×2; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
1996 Ross Frenzy
1998 Ross Frenzy
Overview
Model Year
1996
1998
Brand
Ross
Ross
Model
Frenzy
Frenzy
Bicycle Type
Juvenile
Juvenile
Original MSRP
$154.95
$129.95
Colors
Chrome-plated
Chrome-plated
Sizes
Boys 12"
20"
Weight
—
—
Frameset
Frame Construction
TIG-welded steel
Welded
Frame Material
Hi-tensile steel
Hi-tensile steel
Fork
Ross
Ross
Fork Material
Hi-tensile steel, unicrown crown
Hi-tensile steel, unicrown crown
Drivetrain
Crankset
1-piece 6", 44 teeth
Steel, 44 teeth
Bottom Bracket
Wald
One piece
BB Shell Width
68mm Threadless
American
Rear Cogs
1-speed, 18 teeth
1-speed, 13 teeth
Chain
KMC 410, 1/2 x 1/8"
1/2 x 1/8"
Pedals
Fasten NW-97A
Resin
Brakes
Brakes
Coaster brake
Side-pull/coaster brake brakes, aluminum levers
Cockpit & Contact Points
Headset
1" Victor VP-H93 sealed
1" steel
Handlebar
BMX steel
Steel
Handlebar Extensions
—
Not included
Stem
BMX steel
Steel
Saddle
Ross BMX
BMX
Seatpost
Steel, 22.2 mm (7/8 inch) diameter
Steel, 22.2mm (7/8 inch) diameter
Wheels & Tires
Hubs
—
Front: steel, nutted, Rear: coaster brake
Rims
Kin Lin steel, 36-hole
Steel, 36-hole
Spokes
Sha Dar steel, 105g straight gauge
Steel, 12g straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
20 x 1.75" Ross BMX
20 x 2.00"
Wheel Size
20" wheels
20" wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
71°
—
Seat-tube angle
70°
—
Chainstay / rear center
381 mm
—
Wheelbase
863.6 mm
—
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.