- Frame
- Hi-tensile steel
- Brakes
- Dia-Compe Bulldog brakes, Dia-Compe MX-122 levers
Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
- Frame
- Hi-tensile steel
- Brakes
- Chang Star 900SB front/852A rear brakes, Chang Star levers
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Handling
1996 Haro Blaster has a 1.5° slacker head-tube angle than 1998 Haro Blaster in the archived geometry. Frame size is not identified for 1996 Haro Blaster and 1998 Haro Blaster.
Fork offset, tire size and wheelbase also affect steering; head angle alone is not a handling verdict.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
Uses front tire 20×1.75; rear size isn’t listed.
Uses front tire 20×2.125; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.