Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Gearing

    1999 Cannondale MT800 has a 6% lower climbing ratio than 2000 Cannondale MT800.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

2000 Cannondale MT800Size Legacy reference · 48/36/26T · 11–30T · 8-speed
Lowest0.87:1Highest4.36:1Total range503%

Speed unavailable: wheel or tire size is missing or unclear.

1999 Cannondale MT800Size Legacy reference · 48/36/26T · 11–32T · 8-speed
Lowest0.81:1Highest4.36:1Total range537%

Speed unavailable: wheel or tire size is missing or unclear.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
2000 Cannondale MT800
1999 Cannondale MT800
Overview
Model Year
2000
1999
Brand
Cannondale
Cannondale
Model
MT800
MT800
Bicycle Type
Tandem (mountain)
Tandem (mountain)
Original MSRP
$1,950.99
Not documented
Colors
Super Black, Tropic Green
Green, Viper Red
Sizes
L/M, L/S, M/S, XL/M, XL/S
Extra-Large/Medium, Extra-Large/Small, Large.Medium, L/S, M/S
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
6061 T6 aluminum
6061 T6 aluminum
Fork
Fatty R
Headshok Fatty Rigid
Fork Material
Aluminum, unicrown crown
Aluminum, unicrown crown
Drivetrain
Component Group
Tandem Mix
Mountain Mix
Shifters
Shimano Alivio RapidFire Plus
SRAM ESP 7.0
Front Derailleur
Shimano Deore LX, bottom-pull/clamp-on 31.8mm
Shimano STX top-swing, bottom-pull/clamp-on 31.8mm
Rear Derailleur
Shimano Deore XT SGS
SRAM ESP 7.0
Crankset
Sugino Fuse 500 Tandem, 26/36/48 teeth
Sugino Fuse 500, 26/36/48 teeth
Bottom Bracket
Shimano BB-UN52
Shimano BB-UN52
BB Shell Width
68mm English
68mm English
Rear Cogs
8-speed, 11 - 30 teeth
8-speed, 11 - 32 teeth
Chain
1/2 x 3/32"
Sachs PC-41, 1/2 x 3/32"
Pedals
Not included
Wellgo LU-955A
Brakes
Brakes
CODA Expert linear-pull brakes, Tektro 379A levers
ProMax PX-2 brakes, Tektro 379A levers
Cockpit & Contact Points
Headset
1 1/8" threadless Cane Creek C1
1 1/8" threadless Tange-Seiki STC
Handlebar
CODA Riser/CODA Expert
CODA Riser
Handlebar Extensions
—
Not included
Stem
Aluminum
Tahoma Sonne IV
Saddle
CODA Expert
CODA Performance Mountain
Seatpost
Kalloy SP-263B/PM-780 Suspension
Kalloy SP-248/Polygon PM-780 suspension, 27.2mm diameter
Wheels & Tires
Hubs
Shimano Deore XT
Shimano Tandem HF-07
Rims
Sun Rims Rhyno Lite, 40-hole
Sun Rims Rhyno Lite, 40-hole
Spokes
DT stainless steel, 2.0mm straight gauge
DT stainless steel, 2.0mm straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
26 x 1.25" IRC Smoothie
26 x 1.25" IRC Smoothie
Wheel Size
26" wheels
26" wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
71°
71°
Seat-tube angle
73°
73.5°
Chainstay / rear center
442 mm
424.2 mm
Wheelbase
1821.2 mm
1043.9 mm
Fork offset / rake
45.7 mm
45 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Scroll to Top