Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Gearing
2002 Marin Bobcat Trail has a 12% lower climbing ratio than 2000 Marin Bobcat Trail.
A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Lowest0.79:1Highest3.23:1Total range411%
Speed unavailable: wheel or tire size is missing or unclear.
Lowest0.69:1Highest3.50:1Total range509%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 26×1.95; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2000 Marin Bobcat Trail
2002 Marin Bobcat Trail
Overview
Model Year
2000
2002
Brand
Marin
Marin
Model
Bobcat Trail
Bobcat Trail
Bicycle Type
Mountain bike, front suspension
Mountain bike, front suspension
Original MSRP
$379.00
$399.99
Colors
Brush Polish
Brushed
Sizes
11.5", 13", 15", 17", 18.5", 20"
11.5", 13", 15", 17", 18.5", 20", womens 15", womens 17"
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Ovation 7000 aluminum
7005 aluminum
Fork
Zokes Zone
In-Sync Exceed 266
Fork Material
Aluminum, triple-clamp crown
Aluminum, single triple-clamp crown
Drivetrain
Component Group
Mountain Mix
Mountain Mix
Shifters
Shimano Revo
Shimano Acera
Front Derailleur
Shimano Tourney TY-32
Shimano Acera
Rear Derailleur
Shimano Acera
Shimano Alivio
Crankset
Cyclone alloy, 22/32/42 teeth
TruVativ X-Forge, 22/32/42 teeth
Bottom Bracket
Sealed cartridge
Sealed cartridge
Rear Cogs
7-speed, 13 - 28 teeth
8-speed, 12 - 32 teeth
Chain
Shimano CN-UG50, 1/2 x 3/32"
Shimano IG-31, 1/2 x 3/32"
Pedals
Resin
Resin body, aluminum cage
Brakes
Brakes
Aluminum linear-pull brakes, alloy levers
Aluminum linear-pull brakes, Shimano Acera levers
Cockpit & Contact Points
Headset
Tange-Seiki STE
1 1/8" threadless WTB Momentum ST
Handlebar
Alloy riser
Aluminum, 1" rise
Handlebar Extensions
Not included
Not included
Stem
Alloy
Aluminum, forged
Saddle
Comfort
WTB Comfort V
Seatpost
Aluminum micro-adjust, 27.0mm diameter
Aluminum micro-adjust, 27.0mm diameter
Wheels & Tires
Hubs
Aluminum, Q/R
Aluminum, Q/R
Rims
Alloy, 36-hole
Aluminum, 32-hole
Spokes
Stainless steel, 2.0mm straight gauge
Stainless steel, 15ga. (1.8mm) straight gauge
Front Tire
IRC Mythos XC
26 x 1.95" IRC Mythos XC
Wheel Size
—
26" wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
70°
70°
Seat-tube angle
73°
73°
Chainstay / rear center
425.4 mm
425.4 mm
Wheelbase
1057.3 mm
1079.5 mm
Fork offset / rake
—
38.1 mm
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.