Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Data limitation
No geometry is recorded for 2000 GT Outpost Trail.
- Data limitation
Only 1996 GT Outpost Trail has enough published drivetrain data for gearing calculations.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Gearing unavailable for this size.
Lowest0.86:1Highest3.45:1Total range403%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 26×2.1; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2000 GT Outpost Trail
1996 GT Outpost Trail
Overview
Model Year
2000
1996
Brand
GT
GT
Model
Outpost Trail
Outpost Trail
Bicycle Type
Mountain bike, non-suspension
Mountain bike, non-suspension
Original MSRP
$314.00
$269.95
Colors
Blue/Black/White/SLB, Glacier Blue, Hot Black
Dark blue, Teal
Sizes
12.5", 14.5", 16", 18", 20", 22", womens 16", womens 18", womens 20"
14.5", 16", 18", 20", 22", womens 16", womens 18"
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded steel
Frame Material
Chromoly main triangle/hi-tensile steel rear stays
Chromoly/hi-tensile steel
Fork
GT
GT
Fork Material
Hi-tensile steel, unicrown crown
Hi-tensile steel, unicrown crown
Drivetrain
Component Group
Mountain Mix
Shimano Altus C90
Shifters
SRAM MRX
Shimano Altus EZ Fire
Front Derailleur
Shimano T-300
Shimano Altus top-swing, bottom-pull/clamp-on 28.6 mm
Rear Derailleur
Shimano Acera
Shimano Altus
Crankset
SR XR180
Shimano Altus, 24/32/38 teeth
Bottom Bracket
Shimano cartridge
Shimano BB-CS11, 122.5 mm spindle
BB Shell Width
—
73mm English
Rear Cogs
7-speed
7-speed, 11 - 28 teeth
Chain
Shimano, 1/2 x 3/32"
KMC HP-20, 1/2 x 3/32"
Pedals
Resin
Victor VP-872
Brakes
Brakes
ProMax linear-pull brakes, aluminum linear-pull levers
Shimano Altus brakes, Shimano Altus levers
Cockpit & Contact Points
Headset
1 1/8" sealed mechanism
1" Victor VP-H93 sealed
Handlebar
Riser
GT steel
Handlebar Extensions
Not included
Not included
Stem
Aluminum, adjustable
GT hi-rise
Saddle
—
GT Supersoft
Seatpost
—
Steel, 26.8 mm diameter
Wheels & Tires
Rims
Weinmann 519
Weinmann 2521 Double Wall, 32-hole
Spokes
Stainless steel, straight gauge
2.0mm straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
26 x 2.00" semi-slick
26 x 2.10" Cheng Shin C-1040N
Wheel Size
26" wheels
26" wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
—
70°
Seat-tube angle
—
73.5°
Chainstay / rear center
—
425 mm
Wheelbase
—
1068 mm
Fork offset / rake
—
50 mm
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.