Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Data limitation
Only 2001 Marin Kentfield has enough published drivetrain data for gearing calculations.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Gearing unavailable for this size.
Lowest0.82:1Highest3.69:1Total range448%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 700C×35; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2000 Marin Kentfield
2001 Marin Kentfield
Overview
Model Year
2000
2001
Brand
Marin
Marin
Model
Kentfield
Kentfield
Bicycle Type
City/commuter
City/commuter
Original MSRP
$299.00
$309.99
Colors
Matte Olive
Matte Navy, Matte Taupe
Sizes
13.5", 15.5", 17.5", 19", 20.5", womens 17"
13.5", 15.5", 17.5", 19", 20.5", womens 15", womens 17"
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Ovation chromoly
Chromoly
Fork
Marin
Marin
Fork Material
Chromoly, unicrown crown
Chromoly, unicrown crown
Drivetrain
Component Group
Hybrid Mix
Hybrid Mix
Shifters
SRAM MRX IBS
SRAM ESP 3.0
Front Derailleur
Shimano Tourney TY-32
Shimano Tourney TY-30
Rear Derailleur
Shimano Tourney
SRAM ESP 4.0
Crankset
Shimano Tourney TY-30
Aluminum, 28/38/48 teeth
Bottom Bracket
Sealed cartridge
Cartridge
Rear Cogs
7-speed, 13 - 34 teeth
7-speed, 13 - 34 teeth
Chain
Shimano CN-UG50, 1/2 x 3/32"
KMC UG-50, 1/2 x 3/32"
Pedals
Resin
Resin
Brakes
Brakes
Linear-pull brakes, linear-pull levers
Aluminum linear-pull brakes, aluminum linear-pull levers
Cockpit & Contact Points
Headset
Vp
1" sealed mechanism
Handlebar
Alloy riser
Aluminum, 2" rise
Handlebar Extensions
Not included
Not included
Stem
Alloy
Aluminum, forged
Saddle
Marin Comfort
Comfort
Seatpost
Aluminum micro-adjust
Aluminum, suspension
Wheels & Tires
Hubs
Alloy
Aluminum QR
Rims
Alloy, 36-hole
Aluminum, 36-hole
Spokes
Stainless steel, 2.0mm straight gauge
Stainless steel, 2.0mm
Front Tire
700 x 35c Cross-Terrain
700 x 35c City
Wheel Size
700c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
71°
71°
Seat-tube angle
73°
73°
Chainstay / rear center
439.4 mm
439.4 mm
Wheelbase
1057.3 mm
1057.3 mm
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.