Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Data limitation

    No geometry is recorded for 2000 Trek 520.

  2. Gearing

    2001 Trek 520 has a 6% lower climbing ratio than 2000 Trek 520.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

2000 Trek 52052/42/30T · 11–30T · 8-speed
Lowest1.00:1Highest4.73:1Total range473%
Estimated speed at 90 RPMLowest gear7.2 mphHighest gear34.2 mph

Uses front tire 700C×32; rear size isn’t listed.

2001 Trek 520Size Legacy reference · 52/42/30T · 11–32T · 8-speed
Lowest0.94:1Highest4.73:1Total range504%
Estimated speed at 90 RPMLowest gear6.8 mphHighest gear34.5 mph

Uses front tire 700C×35; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
2000 Trek 520
2001 Trek 520
Overview
Model Year
2000
2001
Brand
Trek
Trek
Model
520
520
Bicycle Type
Touring
Touring
Original MSRP
$1,089.00
$1,099.99
Colors
Pearl Navy
Pearl
Sizes
S, M, L, XL
17", 19", 21", 23", 25"
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Chromoly, double-butted
Chromoly, double-butted
Fork
Trek
Trek
Fork Material
Chromoly, unicrown crown
Chromoly, unicrown crown
Drivetrain
Component Group
Touring Mix
Touring Mix
Shifters
Shimano Ultegra bar-end
Shimano Dura-Ace bar-end
Front Derailleur
Shimano 105
Shimano 105
Rear Derailleur
Shimano Deore LX SGS
Shimano Deore LX SGS
Crankset
Shimano 105, 30/42/52 teeth
Shimano 105, 30/42/52 teeth
Rear Cogs
8-speed, 11 - 30 teeth
8-speed, 11 - 32 teeth
Chain
1/2 x 3/32"
1/2 x 3/32"
Pedals
Not included
Not included
Brakes
Brakes
Avid Linear pull, 2.0 brakes, Dia-Compe 287 levers
Avid Single Digit 5 brakes, Dia-Compe 287 levers
Cockpit & Contact Points
Headset
Tange-Seiki CDS
VP Modus
Handlebar
ICON Sleeve Ergo
ICON Graphite
Handlebar Extensions
Not included
Not included
Stem
ICON Graphite
ICON Graphite
Seatpost
ICON Graphite
ICON Graphite
Wheels & Tires
Hubs
Shimano Deore LX
Shimano Deore LX
Rims
Bontrager Fairlane
Bontrager Fairlane
Spokes
DT stainless steel, 2.0mm double-butted
DT stainless steel, 2.0mm double-butted
Front Tire
700 x 32c Continental Top Touring
700 x 35c IRC PaperLite
Wheel Size
700c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
—
71°
Seat-tube angle
—
74°
Chainstay / rear center
—
449.6 mm
Wheelbase
—
1046.5 mm
Fork offset / rake
—
63.5 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Scroll to Top