Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Data limitation
No geometry is recorded for 2000 Fuji Sanibel.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Ratio2.44:1
Estimated speed at 90 RPMGear
Uses front tire 26×2.125; rear size isn’t listed.
Ratio2.44:1
Speed unavailable: wheel or tire size is missing or unclear.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2000 Fuji Sanibel
1999 Fuji Sanibel
Overview
Model Year
2000
1999
Brand
Fuji
Fuji
Model
Sanibel
Sanibel
Bicycle Type
Cruiser
Cruiser
Original MSRP
$169.99
$159.95
Colors
Peacock Blue, Tuscany
Gloss Black
Sizes
—
19", womens 17"
Weight
—
33.5 lb
Frameset
Frame Construction
—
Pulse-welded
Frame Material
Hi-tensile steel
Hi-tensile steel
Fork
Fuji Cruiser
Akisu
Fork Material
Hi-tensile steel, unicrown crown
Hi-tensile steel, unicrown crown
Drivetrain
Component Group
Cruiser Mix
Cruiser Mix
Crankset
1-piece steel, 44 teeth
1-piece 6 1/2", 44 teeth
Bottom Bracket
Vp
Victor VPB-35
Rear Cogs
1-speed, 18 teeth
1-speed, 18 teeth
Chain
KMC 410, 1/2 x 1/8"
KMC 410, 1/2 x 1/8"
Pedals
Vp
Victor VP-810
Brakes
Brakes
Coaster rear
Coaster rear
Cockpit & Contact Points
Headset
Vp
1" Victor VP-H67
Handlebar
Fuji Cruiser Bend
Cruiser Bend
Handlebar Extensions
Not included
—
Stem
Fuji
Hsin Lung steel
Saddle
Fuji Cruiser
Cruiser w/springs
Seatpost
Steel
Steel, 25.6mm diameter
Wheels & Tires
Hubs
Front: steel, nutted, Rear: Shimano Coaster Brake
Front: aluminum, nutted, Rear: Shimano coaster
Rims
Alloy, 36-hole
HJC 7X, 36-hole
Spokes
Stainless steel, 2.0mm
Sha-Dar stainless steel, 2.0mm straight gauge
Spoke Nipples
—
Brass nipples
Front Tire
26 x 2.125" Kenda Cruiser
26 x 2.125" Kenda K-53
Rear Tire
—
20 x 2.125" Kenda K-53
Wheel Size
26" wheels
Front: 26", Rear: 20" wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
—
70°
Seat-tube angle
—
72°
Chainstay / rear center
—
475 mm
Wheelbase
—
1079.5 mm
Fork offset / rake
—
38 mm
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.