Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Data limitation
No geometry is recorded for 2000 KHS Alite 2000.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Lowest0.69:1Highest4.00:1Total range582%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 26×1.95; rear size isn’t listed.
Lowest0.69:1Highest4.00:1Total range582%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 26×1.95; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2000 KHS Alite 2000
2001 KHS Alite 2000
Overview
Model Year
2000
2001
Brand
KHS
KHS
Model
Alite 2000
Alite 2000
Bicycle Type
Mountain bike, front suspension
Mountain bike, front suspension
Original MSRP
$749.00
$749.00
Colors
Black
Black, Yellow
Sizes
15", 17", 19", 21"
15", 17", 19", 21"
Weight
—
26.5 lb
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Reynolds 7005 double butted aluminum
Easton Ultralite
Fork
Rock Shox Jett XC, 3.0" travel
SR MG91, 3.0" travel
Fork Material
Aluminum/magnesium, triple-clamp crown
Aluminum/magnesium, triple-clamp crown
Drivetrain
Component Group
Mountain Mix
Mountain Mix
Shifters
Shimano Deore
Shimano Deore XT RapidFire SL
Front Derailleur
Shimano Deore
Shimano Deore, top-pull/clamp-on 31.8mm
Rear Derailleur
Shimano Deore SGS
Shimano Deore
Crankset
SR MD350, 22/32/44 teeth
Shimano FC-M440-L, 22/32/44 teeth
Bottom Bracket
Tien Hsin cartridge
TH Sealed bearing cartridge, 111mm spindle
BB Shell Width
—
68mm English
Rear Cogs
9-speed, 11 - 32 teeth
9-speed, 11 - 32 teeth
Chain
KMC Z9000, 1/2 x 3/32"
KMC Z9000, 1/2 x 3/32"
Pedals
Aluminum cage w/clips & straps
Aluminum cage
Brakes
Brakes
Power Tools Linear Pull brakes, Power Tools Linear Pull levers
Shimano Deore V-brake brakes, ProMax linear-pull levers
Cockpit & Contact Points
Headset
1 1/8" threadless aluminum
1 1/8" VP
Handlebar
Kore Lite Bar 1
PowerTools
Handlebar Extensions
Not included
Not included
Stem
Kore Lite 2
Kore Lite 2
Saddle
KHS Padded
KHS Padded
Seatpost
Kalloy SP-242
Aluminum micro-adjust, 26.8mm diameter
Wheels & Tires
Hubs
Shimano RM-40
Front: Powertools, Rear: Shimano Deore
Rims
Mavic 221
Sun Double Wall, 32-hole
Spokes
Stainless steel, double-butted
1.8mm straight gauge
Spoke Nipples
—
Brass nipples
Front Tire
26 x 1.95" IRC Mythos XC kevlar
26 x 1.95" WTB NanoRaptor
Wheel Size
26" wheels
26" wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
—
71°
Seat-tube angle
—
73°
Chainstay / rear center
—
424.2 mm
Wheelbase
—
1079.5 mm
Fork offset / rake
—
44.4 mm
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.