Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Data limitation
No geometry is recorded for 2000 Marin Madrone Trail.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Lowest0.82:1Highest3.69:1Total range448%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 26×2; rear size isn’t listed.
Lowest0.82:1Highest3.69:1Total range448%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 26×1.95; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2000 Marin Madrone Trail
2001 Marin Madrone Trail
Overview
Model Year
2000
2001
Brand
Marin
Marin
Model
Madrone Trail
Madrone Trail
Bicycle Type
City/commuter
Comfort/commuter
Original MSRP
$446.00
$369.99
Colors
Brush Polish
Brush Polished
Sizes
15", 17", 18.5", womens 17"
13", 15", 17", 18.5", 20.5", womens 17"
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Ovation 7000 aluminum
7005 aluminum
Fork
Marin
Marin
Fork Material
Chromoly
Chromoly, unicrown crown
Drivetrain
Component Group
Hybrid Mix
Hybrid Mix
Shifters
SRAM 3.0
SRAM ESP 3.0
Front Derailleur
Shimano C100
Shimano C100
Rear Derailleur
SRAM ESP 5.0
SRAM ESP 4.0
Crankset
Cyclone 300P, 28/38/48 teeth
Aluminum, 28/38/48 teeth
Bottom Bracket
Sealed cartridge
Cartridge
Rear Cogs
7-speed, 13 - 34 teeth
7-speed, 13 - 34 teeth
Chain
Shimano CN-IG31, 1/2 x 3/32"
KMC UG-50, 1/2 x 3/32"
Pedals
Vp
Resin
Brakes
Brakes
Linear-pull brakes, SRAM ESP levers
Aluminum linear-pull brakes, SRAM 3.0 IBS levers
Cockpit & Contact Points
Headset
Tange-Seiki STE
1 1/8" threadless WTB Momentum Comp ST
Handlebar
Alloy riser
Aluminum, 3" rise
Handlebar Extensions
Not included
Not included
Stem
Alloy
Chromoly
Saddle
Marin Comfort
Comfort
Seatpost
Aluminum micro-adjust
Aluminum, suspension
Wheels & Tires
Hubs
Alloy
Aluminum QR
Rims
Alloy, 36-hole
Aluminum, 36-hole
Spokes
Stainless steel, 1.8mm
Stainless steel, 1.8mm
Front Tire
26 x 2.00" WTB All Terrainasaurus
26 x 1.95" WTB All Terrainasaurus
Wheel Size
26" wheels
26" wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
—
70°
Seat-tube angle
—
73°
Chainstay / rear center
—
425.4 mm
Wheelbase
—
1057.3 mm
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.