Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Identity & price

    These bicycles are categorized differently: 1993 Peugeot Frontier is Mountain; 2001 Peugeot Frontier is City & Commuter.

  2. Data limitation

    No geometry is recorded for 2001 Peugeot Frontier.

  3. Gearing

    2001 Peugeot Frontier has a 11% lower climbing ratio than 1993 Peugeot Frontier.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

  4. Identity & price

    2001 Peugeot Frontier had an original MSRP $309 lower than 1993 Peugeot Frontier.

    Original MSRP is the published list price when new, not today’s used-bike value.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1993 Peugeot FrontierSize Legacy reference · 46/36/26T · 13–28T · 7-speed
Lowest0.93:1Highest3.54:1Total range381%
Estimated speed at 90 RPMLowest gear6.5 mphHighest gear24.8 mph

Uses front tire 26×2.1; rear size isn’t listed.

2001 Peugeot Frontier48/38/28T · 13–34T · 7-speed
Lowest0.82:1Highest3.69:1Total range448%
Estimated speed at 90 RPMLowest gear5.7 mphHighest gear25.6 mph

Uses front tire 26×1.95; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1993 Peugeot Frontier
2001 Peugeot Frontier
Overview
Model Year
1993
2001
Brand
Peugeot
Peugeot
Model
Frontier
Frontier
Bicycle Type
Mountain bike, non-suspension
Comfort/commuter
Original MSRP
$609.00
$300.00
Colors
—
Midnight, Sand
Sizes
16, 18, 20, 21.5
40cm, 45cm, 50cm, 55cm
Weight
—
30 lb
Frameset
Frame Construction
Fillet brazed steel
Silver-brazed
Frame Material
Ishiwata TB CroMo
Chromoly
Fork
Tange unicrown CroMo
2.0" travel
Fork Material
—
Chromoly
Drivetrain
Component Group
Shimano Exage LT Rapidfire Plus
Hybrid Mix
Shifters
Shimano Exage LT Rapidfire Plus
Shimano C102
Front Derailleur
Shimano Exage LT
Shimano C101
Rear Derailleur
Shimano Exage LT
Shimano C101 Rapid-Rise
Crankset
Shimano Exage LT, 26/36/46 teeth
Cyclone aluminum 3-piece, 28/38/48 teeth
Bottom Bracket
—
Steel, 102mm spindle
BB Shell Width
—
68mm English
Rear Cogs
7-speed, 13 - 28 teeth
7-speed freewheel, 13 - 34 teeth
Chain
Shimano CN-HG50
KMC IG-51, 1/2 x 3/32"
Pedals
Hsing Ta, HTI-A38N
Resin
Brakes
Brakes
Shimano Exage LT brakes, levers
Aluminum linear-pull front/aluminum V-brake rear brakes, Shimano C101 Revo levers
Cockpit & Contact Points
Headset
—
1 1/8" threadless steel
Handlebar
Sameness 6061-T6, internaly ridged, 170g
Steel, rise
Handlebar Extensions
—
Not included
Stem
Sameness Clean Style
Aluminum, adjustable
Saddle
Velo 186EMGE (Peugeot), Emerald Finish w/gel
Velo Comfort
Seatpost
Kalloy SP-264, micro-adjusting, 300mm
Polygon, suspension, 25.8mm diameter
Wheels & Tires
Hubs
Shimano
Front: aluminum, Q/R, Rear: steel, Q/R
Rims
Sun Metal CR-16, 32-hole
Rigida Aluminum, 36-hole
Spokes
—
Sapim steel, 1.8mm straight gauge
Spoke Nipples
—
Brass nipples
Front Tire
26 x 2.10" Ritchey Z-Max SC WCS
26 x 1.95" Kenda K-847
Wheel Size
26" wheels
26" wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
71°
—
Seat-tube angle
71°
—
Chainstay / rear center
429.3 mm
—
Wheelbase
1051.6 mm
—
Fork offset / rake
45.7 mm
—

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Scroll to Top