Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. No key difference could be established from the available data. Check the full table for the details.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1993 Mt. Shasta SaddlebackSize Legacy reference · 48/38/28T · 14–28T · 7-speed
Lowest1.00:1Highest3.43:1Total range343%
Estimated speed at 90 RPMLowest gear6.9 mphHighest gear23.8 mph

Uses front tire 26×1.95; rear size isn’t listed.

1994 Mt. Shasta SaddlebackSize Legacy reference · 48/38/28T · 14–28T · 6-speed
Lowest1.00:1Highest3.43:1Total range343%
Estimated speed at 90 RPMLowest gear6.9 mphHighest gear23.8 mph

Uses front tire 26×1.95; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1993 Mt. Shasta Saddleback
1994 Mt. Shasta Saddleback
Overview
Model Year
1993
1994
Brand
Mt. Shasta
Mt. Shasta
Model
Saddleback
Saddleback
Bicycle Type
Mountain bike, non-suspension
Mountain bike, non-suspension
Original MSRP
$239.00
$249.00
Colors
—
—
Sizes
14.5, 16, 18, 20, 22. Womens: 16, 18. Boys & Girls: 12.5 (24" wheel).
14.5", 16", 18", 20", 22", womens 16", womens 18"
Weight
—
—
Frameset
Frame Construction
TIG-welded steel
TIG-welded steel
Frame Material
Chrome-moly down tube
Chromoly seat tube
Fork
MT Shasta unicrown
Steel, unicrown
Drivetrain
Component Group
Shimano Tourney
Shimano Tourney TY-30
Shifters
Shimano Tourney thumbshifters
Shimano Tourney TY31 top-mount w/Optical Gear Display
Front Derailleur
Shimano Tourney
Shimano Tourney 30
Rear Derailleur
Shimano Tourney
Shimano Tourney 30
Crankset
Shimano Tourney, 28/38/48 teeth
Tracer, 28/38/48 teeth
Rear Cogs
7-speed, 14 - 28 teeth
6-speed, 14 - 28 teeth
Chain
Hyperglide compatible
Shimano HyperGlide
Pedals
Nylon ATB w/CroMo spindles
Resin w/chromoly axles
Brakes
Brakes
Shimano Tourney 20 brakes, levers
Shimano with alloy Lever w/Reach Adjuster brakes, levers
Cockpit & Contact Points
Handlebar
Flat, Bulged
Flat
Stem
Hi-Rise ATB
Hi-Rise w/Internal cable routing
Saddle
GT Supersoft
Mt. Shasta Supersoft
Seatpost
Steel, Satin Finish
Steel
Wheels & Tires
Hubs
Alloy
Alloy Q/R
Rims
Steel
Araya AP-21, 36-hole
Front Tire
26 x 1.95" Cheng Shin Dual Purpose
26 x 1.95" Maxxis
Wheel Size
26" wheels
26" wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
70°
70°
Seat-tube angle
73.5°
73.5°
Chainstay / rear center
424.2 mm
424.2 mm
Wheelbase
1077 mm
1059.2 mm
Fork offset / rake
50.8 mm
45.7 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Sponsored affiliate link
Scroll to Top