Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
No key difference could be established from the available data. Check the full table for the details.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Lowest0.69:1Highest3.50:1Total range509%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 26×1.95; rear size isn’t listed.
Lowest0.69:1Highest3.50:1Total range509%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 26×1.95; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2003 Marin Bobcat Trail
2002 Marin Bobcat Trail
Overview
Model Year
2003
2002
Brand
Marin
Marin
Model
Bobcat Trail
Bobcat Trail
Bicycle Type
Mountain bike, front suspension
Mountain bike, front suspension
Original MSRP
$429.99
$399.99
Colors
Gloss Red
Brushed
Sizes
11.5", 13", 15", 17", 18.5", 20"
11.5", 13", 15", 17", 18.5", 20", womens 15", womens 17"
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
7005 aluminum
7005 aluminum
Fork
In-Sync Grind 323, 70mm travel
In-Sync Exceed 266
Fork Material
Aluminum, single crown
Aluminum, single triple-clamp crown
Drivetrain
Component Group
Mountain Mix
Mountain Mix
Shifters
Shimano Acera
Shimano Acera
Front Derailleur
Shimano Acera
Shimano Acera
Rear Derailleur
Shimano Acera
Shimano Alivio
Crankset
TruVativ X-Forge, 22/32/42 teeth
TruVativ X-Forge, 22/32/42 teeth
Bottom Bracket
Sealed cartridge
Sealed cartridge
Rear Cogs
8-speed, 12 - 32 teeth
8-speed, 12 - 32 teeth
Chain
Shimano IG-31, 1/2 x 3/32"
Shimano IG-31, 1/2 x 3/32"
Pedals
Resin body, aluminum cage
Resin body, aluminum cage
Brakes
Brakes
Shimano BR-M475 Mechanical Disc brakes, Shimano Acera levers
Aluminum linear-pull brakes, Shimano Acera levers
Cockpit & Contact Points
Headset
1 1/8" threadless WTB Momentum ST
1 1/8" threadless WTB Momentum ST
Handlebar
Aluminum, 1" rise
Aluminum, 1" rise
Handlebar Extensions
Not included
Not included
Stem
Aluminum, forged
Aluminum, forged
Saddle
WTB Comfort V
WTB Comfort V
Seatpost
Aluminum micro-adjust, 27.0mm diameter
Aluminum micro-adjust, 27.0mm diameter
Wheels & Tires
Hubs
Aluminum, Q/R
Aluminum, Q/R
Rims
Aluminum, 32-hole
Aluminum, 32-hole
Spokes
Stainless steel, 15ga. (1.8mm) straight gauge
Stainless steel, 15ga. (1.8mm) straight gauge
Front Tire
26 x 1.95" Kenda Koyote
26 x 1.95" IRC Mythos XC
Wheel Size
26" wheels
26" wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
70°
70°
Seat-tube angle
73°
73°
Chainstay / rear center
425.4 mm
425.4 mm
Wheelbase
1076.1 mm
1079.5 mm
Fork offset / rake
38.1 mm
38.1 mm
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.