Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
No key difference could be established from the available data. Check the full table for the details.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Lowest0.94:1Highest4.73:1Total range504%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 700C×32; rear size isn’t listed.
Lowest0.94:1Highest4.73:1Total range504%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 700C×32; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2003 Terry Col de la Madeleine
2002 Terry col de la Madeleine
Overview
Model Year
2003
2002
Brand
Terry
Terry
Model
Col de la Madeleine
col de la Madeleine
Bicycle Type
Touring
Touring
Original MSRP
$2,000.00
$2,000.00
Colors
Red
Red
Sizes
40.6cm, 44.5cm, 48.3cm, 52.1cm, 55.9cm, 58.5cm
40.6cm, 44.5cm, 48.3cm, 52.1cm, 55.9cm, 58.5cm
Weight
20 lb
20 lb
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Reynolds 853
Reynolds 853
Fork
Terry
Terry
Fork Material
Reynolds 520, unicrown crown
Reynolds 531, unicrown crown
Drivetrain
Component Group
Shimano Ultegra Triple
Shimano Ultegra Triple
Shifters
Shimano Deore XT RapidFire SL
Shimano Deore XT RapidFire SL
Front Derailleur
Shimano FD-R443, clamp-on
Shimano FD-R443, clamp-on
Rear Derailleur
Shimano Deore XT GS
Shimano Deore XT GS
Crankset
Shimano Ultegra Triple, 30/42/52 teeth
Shimano Ultegra Triple, 30/42/52 teeth
Bottom Bracket
Shimano BB-6500, 118mm spindle
Shimano BB-6500, 118mm spindle
BB Shell Width
68mm English
—
Rear Cogs
9-speed, 11 - 32 teeth
9-speed, 11 - 32 teeth
Chain
KMC Z9900, 1/2 x 3/32"
KMC Z-9900, 1/2 x 3/32"
Pedals
Not included
Not included
Brakes
Brakes
Shimano A550 brakes, Shimano Deore XT RapidFire SL levers
Shimano A550 brakes, Shimano Deore XT RapidFire SL levers
Cockpit & Contact Points
Headset
1" Shimano Ultegra
1" Shimano Ultegra
Handlebar
Kalloy aluminum
Kalloy aluminum
Handlebar Extensions
Aluminum
Aluminum
Stem
Terry Hi-Rise Combo Stem
Terry T-Stem
Saddle
Terry
Terry
Seatpost
Kalloy SP-267, 27.2mm diameter
Kalloy SP-267, 26.8mm diameter
Wheels & Tires
Hubs
Formula aluminum, Q/R
Formula aluminum, Q/R
Rims
Velocity Aero Head, 32-hole
Velocity Aero Head, 32-hole
Spokes
Formula stainless steel, 14/15ga. (2.0/1.8mm) double-butted
DT stainless steel, 14/15 ga. (2.0/1.8mm) double-butted
Spoke Nipples
Aluminum nipples
Alloy nipples
Front Tire
700 x 32c Panaracer Pasela
700 x 32c Vee Rubber
Wheel Size
700c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
71°
71°
Seat-tube angle
73°
73°
Chainstay / rear center
431.8 mm
431.8 mm
Wheelbase
1026.2 mm
1033.8 mm
Fork offset / rake
61 mm
55 mm
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.