Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. No key difference could be established from the available data. Check the full table for the details.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

2003 KHS Flite 300Size Legacy reference · 52/42/30T · 12–25T · 8-speed
Lowest1.20:1Highest4.33:1Total range361%
Estimated speed at 90 RPMLowest gear8.5 mphHighest gear30.5 mph

Uses front tire 700C×23; rear size isn’t listed.

2004 KHS Flite 300Size Legacy reference · 52/42/30T · 12–25T · 8-speed
Lowest1.20:1Highest4.33:1Total range361%
Estimated speed at 90 RPMLowest gear8.5 mphHighest gear30.5 mph

Uses front tire 700C×23; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
2003 KHS Flite 300
2004 KHS Flite 300
Overview
Model Year
2003
2004
Brand
KHS
KHS
Model
Flite 300
Flite 300
Bicycle Type
Road/sport
Road/sport
Original MSRP
$659.00
$689.00
Colors
Blue, Yellow
White/Black, Black/Red
Sizes
50cm, 52cm, 54cm, 56cm, 58cm, 60cm
S, M, L, XL
Weight
24.6 lb
24.6 lb
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Reynolds 520
Aluminum, butted
Fork
Khs
Khs
Fork Material
Carbon fiber composite, unicrown crown
Carbon fiber w/chromoly steerer, unicrown crown
Drivetrain
Component Group
Road Mix
Road Mix
Shifters
Shimano Sora STI Dual Control
Shimano Sora STI Dual Control
Front Derailleur
Shimano Sora
Shimano Sora
Rear Derailleur
Shimano Sora
Shimano Sora
Crankset
Cyclone aluminum, 30/42/52 teeth
TruVativ Touro, 30/42/52 teeth
Bottom Bracket
Sealed cartridge
Sealed cartridge
BB Shell Width
68mm English
68mm English
Rear Cogs
8-speed, 12 - 25 teeth
8-speed, 12 - 25 teeth
Chain
KMC Z82, 1/2 x 3/32"
KMC Z82, 1/2 x 3/32"
Pedals
Aluminum w/clips & straps
Aluminum w/clips & straps
Brakes
Brakes
ProMax Dual Pivot brakes, Shimano Sora STI Dual Control levers
Tektro 423A dual pivot brakes, Shimano Sora STI Dual Control levers
Cockpit & Contact Points
Headset
1 1/8" threadless steel
1 1/8" threadless steel
Handlebar
Aluminum
Aluminum
Handlebar Extensions
Not included
Not included
Stem
Aluminum
Aluminum
Saddle
KHS Padded
KHS Padded
Seatpost
Aluminum micro-adjust
Aluminum micro-adjust
Wheels & Tires
Hubs
Aluminum, Q/R
Aluminum, Q/R
Rims
Aluminum, 32-hole
Aluminum, 32-hole
Spokes
Stainless steel, 14ga. (2.0mm) straight gauge
Stainless steel, 14ga. (2.0mm) straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
700 x 23c KHS
700 x 23c Kenda Koncept
Wheel Size
700c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
73.5°
73.5°
Seat-tube angle
72°
72°
Chainstay / rear center
420 mm
420 mm
Wheelbase
981 mm
981 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Campaign
Scroll to Top