Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
No key difference could be established from the available data. Check the full table for the details.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Lowest0.73:1Highest3.82:1Total range521%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 26×1.95; rear size isn’t listed.
Lowest0.73:1Highest4.00:1Total range545%
Speed unavailable: wheel or tire size is missing or unclear.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2002 Marin Hawk Hill
2000 Marin Hawk Hill
Overview
Model Year
2002
2000
Brand
Marin
Marin
Model
Hawk Hill
Hawk Hill
Bicycle Type
Mountain bike, front suspension
Mountain bike, front suspension
Original MSRP
$459.99
$449.00
Colors
Blue/Silver
Brush Polish
Sizes
13", 15", 17", 18.5", 20", womens 17"
11.5", 13", 15", 17", 18.5", 20"
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
7005 aluminum
Ovation 7000 aluminum
Fork
In-Sync Grind 323
In-Sync 328
Fork Material
Aluminum, single triple-clamp crown
Aluminum, triple-clamp crown
Drivetrain
Component Group
Mountain Mix
Mountain Mix
Shifters
Shimano Alivio RapidFire Plus
SRAM 5.0
Front Derailleur
Shimano Acera
Shimano Acera
Rear Derailleur
Shimano Deore
SRAM ESP 5.0
Crankset
TruVativ X-Forge, 22/32/42 teeth
Cyclone alloy, 22/32/44 teeth
Bottom Bracket
Sealed cartridge
Sealed cartridge
Rear Cogs
8-speed, 11 - 30 teeth
8-speed, 11 - 30 teeth
Chain
Shimano IG-31, 1/2 x 3/32"
Shimano CN-IG31, 1/2 x 3/32"
Pedals
Resin
Resin
Brakes
Brakes
Aluminum linear-pull brakes, aluminum linear-pull levers
Aluminum linear-pull brakes, alloy levers
Cockpit & Contact Points
Headset
1 1/8" threadless WTB Momentum Comp ST
Tange-Seiki STE
Handlebar
Aluminum, 1" rise
Alloy riser
Handlebar Extensions
Not included
Not included
Stem
Aluminum, forged
Alloy
Saddle
WTB Speed V
WTB SSTX2
Seatpost
Aluminum micro-adjust, 27.0mm diameter
Aluminum micro-adjust, 27.0mm diameter
Wheels & Tires
Hubs
Aluminum, Q/R
Aluminum, Q/R
Rims
Alex TA-19, 32-hole
Alloy, 32-hole
Spokes
DT stainless steel, 15ga. (1.8mm) straight gauge
Stainless steel, 2.0mm straight gauge
Front Tire
26 x 1.95" IRC Mythos XC
IRC Mythos XC
Wheel Size
26" wheels
—
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
70°
70°
Seat-tube angle
73°
73°
Chainstay / rear center
425.4 mm
425.4 mm
Wheelbase
1079.5 mm
1057.3 mm
Fork offset / rake
38.1 mm
—
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.