Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
No key difference could be established from the available data. Check the full table for the details.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Lowest0.82:1Highest4.00:1Total range486%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 26×1.95; rear size isn’t listed.
Lowest0.82:1Highest4.36:1Total range530%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 26×1.95; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2002 Marin Coast Trail
2001 Marin Coast Trail
Overview
Model Year
2002
2001
Brand
Marin
Marin
Model
Coast Trail
Coast Trail
Bicycle Type
Comfort/commuter
Comfort/commuter
Original MSRP
$399.99
$429.99
Colors
Polished
Matte Denim
Sizes
13", 15", 17", 18.5", 20.5", womens 15", womens 17"
13", 15", 17", 18.5", 20.5", womens 17"
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
7005 aluminum
7005 aluminum
Fork
In-Sync Exceed 266
In-sync 266
Fork Material
Aluminum, single triple-clamp crown
Triple-clamp
Drivetrain
Component Group
Hybrid Mix
Hybrid Mix
Shifters
Shimano Acera EZ Fire Plus
SRAM ESP 3.0
Front Derailleur
Shimano C100
Shimano C100
Rear Derailleur
Shimano Alivio
SRAM ESP 5.0
Crankset
SR Suntour CR400, 28/38/48 teeth
Aluminum, 28/38/48 teeth
Bottom Bracket
Sealed cartridge
Cartridge
Rear Cogs
8-speed, 12 - 34 teeth
8-speed, 11 - 34 teeth
Chain
Shimano CN-IG31, 1/2 x 3/32"
KMC UG-50, 1/2 x 3/32"
Pedals
Resin
Resin
Brakes
Brakes
Aluminum linear-pull brakes, Shimano Acera levers
Aluminum linear-pull brakes, aluminum linear-pull levers
Cockpit & Contact Points
Headset
1 1/8" threadless WTB Momentum ST
1 1/8" threadless WTB Momentum Comp ST
Handlebar
Aluminum, 1" rise
Aluminum, 3" rise
Handlebar Extensions
Not included
Not included
Stem
Aluminum, forged
Aluminum, forged
Saddle
Marin Super Comfort
Comfort
Seatpost
Aluminum, suspension, 27.0mm diameter
Aluminum, suspension
Wheels & Tires
Hubs
Aluminum, Q/R
Aluminum QR
Rims
Alex TA-19, 32-hole
Aluminum, 36-hole
Spokes
Stainless steel, 14ga. (2.0mm) straight gauge
Stainless steel, 1.8mm
Front Tire
26 x 1.95" WTB All Terrainasaurus
26 x 1.95" WTB All Terrainasaurus
Wheel Size
26" wheels
26" wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
70°
70°
Seat-tube angle
73°
73°
Chainstay / rear center
425.4 mm
425.4 mm
Wheelbase
1079.5 mm
1057.3 mm
Fork offset / rake
38.1 mm
—
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.