Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Handling
2001 Diamondback Ignitor CB has a 1.0° slacker head-tube angle than 2000 Diamondback Ignitor CB in the archived geometry. Frame size is not identified for 2001 Diamondback Ignitor CB and 2000 Diamondback Ignitor CB.
Fork offset, tire size and wheelbase also affect steering; head angle alone is not a handling verdict.
- Data limitation
Only 2001 Diamondback Ignitor CB has enough published drivetrain data for gearing calculations.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Ratio2.75:1
Estimated speed at 90 RPMGear
Rear tire: 20×1.95.
Gearing unavailable for this size.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2001 Diamondback Ignitor CB
2000 Diamondback Ignitor CB
Overview
Model Year
2001
2000
Brand
Diamondback
Diamondback
Model
Ignitor CB
Ignitor CB
Bicycle Type
BMX
BMX
Original MSRP
$164.99
$179.99
Colors
Chrome-Plated, Race Red
Blue, Chrome-Plated, Yellow
Sizes
Expert
Pro XL
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Hi-tensile steel, oversize
Hi-tensile steel, oversize
Fork
Diamondback
Diamondback
Fork Material
Steel, unicrown crown
Hi-tensile steel, unicrown crown
Drivetrain
Crankset
1-piece 165mm, 44 teeth
1-piece 6 1/2", 44 teeth
Bottom Bracket
Steel retainer style
Diamondback spindle
Rear Cogs
1-speed, 16 teeth
1-speed
Chain
KMC Z410, 1/2 x 3/32"
—
Pedals
Resin
Platform, resin
Brakes
Brakes
ProMax 295C w/coaster rear brakes, ProMax 187 rear levers
Linear pull/coaster rear brakes, aluminum linear-pull rear levers
Cockpit & Contact Points
Headset
1" threadless YST HP663
—
Handlebar
DB expert
Diamondback steel
Handlebar Extensions
Not included
Not included
Stem
Aluminum
Alloy Ahead type
Saddle
Padded BMX
Diamondback padded
Seatpost
Aluminum micro-adjust, 25.4mm diameter
Aluminum micro-adjust, 25.4mm diameter
Wheels & Tires
Hubs
Steel
Front: steel, nutted, Rear: coaster brake
Rims
Alex Z1000, 36-hole
Alloy, 36-hole
Spokes
—
Stainless steel, 2.0mm
Front Tire
20 x 2.125" Tioga Comp III
20 x 2.125" Tioga Comp III
Rear Tire
20 x 1.95 Tioga Comp III
20 x 1.75" Tioga Comp III
Wheel Size
20" wheels
20" wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
74°
75°
Seat-tube angle
70°
70°
Chainstay / rear center
368.3 mm
365.8 mm
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.