Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
No key difference could be established from the available data. Check the full table for the details.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Lowest0.88:1Highest4.00:1Total range457%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 700C×35; rear size isn’t listed.
Lowest0.88:1Highest4.36:1Total range499%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 700C×35; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2001 Marin Larkspur
2003 Marin Larkspur
Overview
Model Year
2001
2003
Brand
Marin
Marin
Model
Larkspur
Larkspur
Bicycle Type
City/commuter
City/commuter
Original MSRP
$359.99
$349.99
Colors
Brush Polished
Brushed
Sizes
13.5", 15.5", 17.5", 19", 20.5", womens 15", womens 17"
13.5", 15.5", 17.5", 19", 20.5", womens 15", womens 17"
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
7000 T6 aluminum, double-butted
7000 aluminum, double-butted
Fork
Marin
—
Fork Material
Chromoly, unicrown crown
Chromoly, unicrown crown
Drivetrain
Component Group
Hybrid Mix
Hybrid Mix
Shifters
SRAM ESP 3.0
Shimano Acera
Front Derailleur
Shimano Tourney TY-30
Shimano C100
Rear Derailleur
SRAM ESP 5.0
Shimano Acera
Crankset
Aluminum, 28/38/48 teeth
SR Suntour CR400, 28/38/48 teeth
Bottom Bracket
Cartridge
Sealed cartridge
Rear Cogs
8-speed, 12 - 32 teeth
8-speed, 11 - 32 teeth
Chain
KMC UG-50, 1/2 x 3/32"
Shimano CN-UG50, 1/2 x 3/32"
Pedals
Resin
Resin
Brakes
Brakes
Aluminum linear-pull brakes, aluminum linear-pull levers
Aluminum linear-pull brakes, aluminum linear-pull levers
Cockpit & Contact Points
Headset
1 1/8" sealed mechanism
1 1/8" threaded sealed mechanism
Handlebar
Aluminum, 1" rise
Aluminum, 1" rise
Handlebar Extensions
Not included
Not included
Stem
Aluminum, forged
Aluminum, forged
Saddle
Comfort
Comfort
Seatpost
Aluminum, suspension
Aluminum, suspension
Wheels & Tires
Hubs
Aluminum QR
Aluminum, Q/R
Rims
Aluminum, 36-hole
Alex TA-19, 36-hole
Spokes
Stainless steel, 2.0mm
Stainless steel, 14ga. (2.0mm) straight gauge
Front Tire
700 x 35c City
700 x 35c City
Wheel Size
700c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
71°
71°
Seat-tube angle
73°
73°
Chainstay / rear center
439.4 mm
439.4 mm
Wheelbase
1057.3 mm
1057.3 mm
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.