Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Identity & price

    These bicycles are categorized differently: 2001 Trek 7500 FX is Hybrid; 2004 Trek 7500 FX is City & Commuter.

  2. Handling

    2001 Trek 7500 FX has a 1.0° slacker head-tube angle than 2004 Trek 7500 FX in the archived geometry. Frame size is not identified for 2001 Trek 7500 FX and 2004 Trek 7500 FX.

    Fork offset, tire size and wheelbase also affect steering; head angle alone is not a handling verdict.

  3. Gearing

    2004 Trek 7500 FX has a 6% lower climbing ratio than 2001 Trek 7500 FX.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

  4. Identity & price

    2004 Trek 7500 FX had an original MSRP $110 lower than 2001 Trek 7500 FX.

    Original MSRP is the published list price when new, not today’s used-bike value.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

2001 Trek 7500 FXSize Legacy reference · 48/38/28T · 11–30T · 8-speed
Lowest0.93:1Highest4.36:1Total range468%
Estimated speed at 90 RPMLowest gear6.8 mphHighest gear31.8 mph

Uses front tire 700C×35; rear size isn’t listed.

2004 Trek 7500 FXSize Legacy reference · 48/38/28T · 11–32T · 8-speed
Lowest0.88:1Highest4.36:1Total range499%
Estimated speed at 90 RPMLowest gear6.4 mphHighest gear31.8 mph

Uses front tire 700C×35; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
2001 Trek 7500 FX
2004 Trek 7500 FX
Overview
Model Year
2001
2004
Brand
Trek
Trek
Model
7500 FX
7500 FX
Bicycle Type
Hybrid
Comfort/commuter
Original MSRP
$769.99
$659.99
Colors
Gold, Red
Charcoal/Gold
Sizes
15", 17.5", 20", 22.5"
15", 17.5", 20", 22.5"
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Alpha ZX aluminum
Aluminum
Fork
Trek
Trek
Fork Material
4130 chromoly, unicrown crown
Chromoly, unicrown crown
Drivetrain
Component Group
Hybrid Mix
Hybrid Mix
Shifters
Shimano Alivio RapidFire Plus
Shimano Alivio RapidFire
Front Derailleur
Shimano Nexave 301
Shimano Nexave T301
Rear Derailleur
Shimano Deore LX SGS
Shimano Deore LX
Crankset
Shimano Nexave 401, 28/38/48 teeth
Bontrager Select, 28/38/48 teeth
Rear Cogs
8-speed, 11 - 30 teeth
8-speed, 11 - 32 teeth
Chain
1/2 x 3/32"
1/2 x 3/32"
Pedals
Aluminum w/clips & straps
Aluminum cage w/clips & straps
Brakes
Brakes
Aluminum linear-pull brakes, aluminum linear-pull levers
Aluminum linear-pull brakes, aluminum linear-pull levers
Cockpit & Contact Points
Headset
1 1/8" Aheadset STR
1 1/8" threadless Aheadset
Handlebar
Bontrager CrowBar Sport
Bontrager Select
Handlebar Extensions
Not included
Not included
Stem
Bontrager Sport
Bontrager Sport
Saddle
Bontrager FS 2000
Bontrager CRZ
Seatpost
Bontrager Sport
Bontrager Sport
Wheels & Tires
Hubs
Rolf Vector
Bontrager Select
Rims
Rolf Vector
Bontrager Select, 20-hole/24-hole
Spokes
DT stainless steel, 2.0mm straight gauge
Stainless steel, 14/15ga. (2.0/1.8mm) double-butted
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
700 x 35c IRC PaperLite
700 x 35c Bontrager Select
Wheel Size
700c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
70.5°
71.5°
Seat-tube angle
74°
73.5°
Chainstay / rear center
444.5 mm
445 mm
Wheelbase
1056.6 mm
1058 mm
Fork offset / rake
68.6 mm
—

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Scroll to Top