Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Data limitation
No geometry is recorded for 2000 Kona Blast.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Lowest0.80:1Highest3.50:1Total range438%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 26×1.9; rear size isn’t listed.
Lowest0.80:1Highest3.82:1Total range477%
Speed unavailable: wheel or tire size is missing or unclear.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2001 Kona Blast
2000 Kona Blast
Overview
Model Year
2001
2000
Brand
Kona
Kona
Model
Blast
Blast
Bicycle Type
Mountain bike, front suspension
Mountain bike, front suspension
Original MSRP
$525.00
$519.00
Colors
Bright Silver Metallic
Mongo
Sizes
14", 16", 18", 19", 20", 21"
14", 16", 18", 19", 20", 21"
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Aluminum, butted
7005 aluminum, butted
Fork
INSync 326
RST 281-EL, 2.5" travel
Fork Material
Aluminum, triple-clamp crown
Aluminum, triple-clamp crown
Drivetrain
Component Group
Mountain Mix
Mountain Mix
Shifters
Shimano Alivio RapidFire Plus
Shimano Alivio RapidFire Plus
Front Derailleur
Shimano Acera X
Shimano Acera top-swing
Rear Derailleur
Shimano Deore
Shimano Deore
Crankset
TruVativ 6D, 24/32/42 teeth
TruVativ 4D, 24/32/42 teeth
Bottom Bracket
Shimano BB-LP27
Shimano BB-LP27
Rear Cogs
8-speed, 12 - 30 teeth
8-speed, 11 - 30 teeth
Chain
Shimano CN-IG31, 1/2 x 3/32"
Shimano CN-IG31, 1/2 x 3/32"
Pedals
Wellgo
Platform with clips and straps
Brakes
Brakes
Tektro 829A brakes, Shimano Rapidfire levers
Tektro 821A linear-pull brakes, Tektro 342 A levers
Cockpit & Contact Points
Headset
Aheadset STS
WTB Momentum ST2
Handlebar
Aluminum, rise
Alloy riser
Handlebar Extensions
Not included
Not included
Stem
Kona Control
Kona Control
Saddle
SDG Comp
SDG Comp
Seatpost
LC 203
Kona Thumb
Wheels & Tires
Hubs
Front: Joe's QR, Rear: Shimano Acera X
Front: Kona OB-1, Rear: Shimano Acera
Rims
Mavic X139
Mavic X138, 32-hole
Spokes
Stainless steel, 15/14g
Stainless steel, 1.8mm front, 2.0mm rear
Spoke Nipples
—
Brass nipples
Front Tire
26 x 1.90" Tioga Factory XC
WTB PrimalRaptor
Wheel Size
26" wheels
—
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
71°
—
Seat-tube angle
74°
—
Chainstay / rear center
425.4 mm
—
Wheelbase
1066.8 mm
—
Fork offset / rake
38.1 mm
—
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.