Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Data limitation

    No geometry is recorded for 2001 Schwinn Tiger and 2003 Schwinn Tiger.

  2. Gearing

    2003 Schwinn Tiger has a 15% lower climbing ratio than 2001 Schwinn Tiger.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

2001 Schwinn Tiger24T · 16T · 1-speed
Ratio1.50:1
Estimated speed at 90 RPMGear5.0 mph

Uses front tire 12×2.25; rear size isn’t listed.

2003 Schwinn Tiger23T · 18T · 1-speed
Ratio1.28:1
Estimated speed at 90 RPMGear4.2 mph

Uses front tire 12×2.125; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
2001 Schwinn Tiger
2003 Schwinn Tiger
Overview
Model Year
2001
2003
Brand
Schwinn
Schwinn
Model
Tiger
Tiger
Bicycle Type
Juvenile
Juvenile mountain bike, non-suspension
Original MSRP
$119.95
Not documented
Colors
Black w/ Orange Fenders
Black w/ Orange fenders
Sizes
Mini
Boys
Weight
—
—
Frameset
Frame Construction
TIG-welded
—
Frame Material
Hi-tensile steel
Hi-tensile steel
Fork
Schwinn
Schwinn
Fork Material
Hi-tensile steel, unicrown crown
Hi-tensile steel, unicrown crown
Drivetrain
Component Group
—
Juvenile Mix
Crankset
1-piece 3 1/2", 24 teeth
Steel, 23 teeth
Bottom Bracket
—
One piece
Rear Cogs
1-speed, 16 teeth
1-speed, 18 teeth
Chain
1/2 x 1/8"
1/2 x 3/32"
Pedals
Nylon platform
Platform
Brakes
Brakes
Coaster rear
Coaster brake rear
Cockpit & Contact Points
Headset
Steel
Steel
Handlebar
Junior BMX steel w/crossbar
Steel BMX
Handlebar Extensions
Not included
Not included
Stem
Steel
Steel, quill
Saddle
Schwinn
Padded saddle
Seatpost
Steel
Steel, 22.2mm (7/8 inch) diameter
Wheels & Tires
Hubs
Front: steel, Rear: coaster brake
Front: steel, nutted, Rear: coaster brake
Rims
Steel, 16-hole
Steel, 28-hole
Spokes
—
14ga. (2.0mm) straight gauge
Front Tire
12 x 2.25" Comp III Type
12 x 2.125" Comp III style
Wheel Size
12" wheels
12" wheels

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run.

Sponsored affiliate link
Scroll to Top