Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Handling

    1995 Schwinn Passage has a 1.0° slacker head-tube angle than 1997 Schwinn Passage in the archived geometry. Frame size is not identified for 1995 Schwinn Passage and 1997 Schwinn Passage.

    Fork offset, tire size and wheelbase also affect steering; head angle alone is not a handling verdict.

  2. Gearing

    1997 Schwinn Passage has a 8% lower climbing ratio than 1995 Schwinn Passage.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

  3. Identity & price

    1995 Schwinn Passage had an original MSRP $159 lower than 1997 Schwinn Passage.

    Original MSRP is the published list price when new, not today’s used-bike value.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1995 Schwinn PassageSize Legacy reference · 46/36/26T · 11–24T · 7-speed
Lowest1.08:1Highest4.18:1Total range386%
Estimated speed at 90 RPMLowest gear7.7 mphHighest gear29.7 mph

Uses front tire 700C×26; rear size isn’t listed.

1997 Schwinn PassageSize Legacy reference · 46/36/26T · 11–26T · 7-speed
Lowest1.00:1Highest4.18:1Total range418%
Estimated speed at 90 RPMLowest gear7.1 mphHighest gear29.6 mph

Uses front tire 700C×25; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1995 Schwinn Passage
1997 Schwinn Passage
Overview
Model Year
1995
1997
Brand
Schwinn
Schwinn
Model
Passage
Passage
Bicycle Type
Road/sport
Road/sport
Original MSRP
$539.95
$699.00
Colors
Light blue
Metallic blue
Sizes
50 cm, 52 cm, 54 cm, 56 cm, 58 cm, 60 cm
50 cm, 52 cm, 54 cm, 56 cm, 58 cm, 60 cm
Weight
—
—
Frameset
Frame Construction
TIG-welded steel
TIG-welded
Frame Material
Chromoly, double-butted, main triangle
Chromoly, double-butted
Fork
Schwinn
Schwinn
Fork Material
Chromoly, forged dropouts, unicrown crown
Chromoly, unicrown crown
Drivetrain
Component Group
Shimano RSX
Shimano RSX
Shifters
Shimano RSX down-tube
Shimano RSX STI Dual Control
Front Derailleur
Shimano RSX (triple), bottom-pull/clamp-on 28.6 mm
Shimano RSX top-swing, bottom-pull/clamp-on 28.6 mm
Rear Derailleur
Shimano RSX
Shimano RSX GS
Crankset
Shimano RSX, 26/36/46 teeth
Shimano RSX, 26/36/46 teeth
Bottom Bracket
—
Shimano BB-LP26, 118 mm spindle
BB Shell Width
—
68mm English
Rear Cogs
7-speed, 11 - 24 teeth
7-speed, 11 - 26 teeth
Chain
KMC SS-90, 1/2 x 3/32"
Shimano CN-HG50, 1/2 x 3/32"
Pedals
HTI quill type
Aluminum cage w/clips & straps
Brakes
Brakes
Shimano RSX Dual Pivot brakes, Shimano RSX levers
Shimano RSX Dual Pivot brakes, Shimano RSX levers
Cockpit & Contact Points
Headset
1" Tioga Expert
1" Tioga SE-II
Handlebar
SR Modolo Bend anatomic
Aluminum
Stem
Chromoly
Chromoly
Saddle
Viscount
Schwinn Road Comfort
Seatpost
Polygon PM-311, 26.6 mm diameter
Hsin Lung SP-51, 27.2 mm diameter
Wheels & Tires
Hubs
Shimano AceraX
Front: Formula aluminum, Q/R, Rear: Shimano RSX
Rims
Mavic M196, 32-hole
Mavic CXP 10, 32-hole
Spokes
Stainless steel, 2.0 mm straight gauge
Stainless steel, 1.8mm straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
700 x 26c Tioga Proline
700 x 25c Schwinn
Wheel Size
700c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
73°
74°
Seat-tube angle
73.5°
73.5°
Chainstay / rear center
419.1 mm
410 mm
Wheelbase
1008.4 mm
983 mm
Fork offset / rake
45.7 mm
40 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Sponsored affiliate link
Scroll to Top