Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Gearing

    1995 Schwinn Passage has a 6% lower climbing ratio than 1994 Schwinn Passage.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1995 Schwinn PassageSize Legacy reference · 46/36/26T · 11–24T · 7-speed
Lowest1.08:1Highest4.18:1Total range386%
Estimated speed at 90 RPMLowest gear7.7 mphHighest gear29.7 mph

Uses front tire 700C×26; rear size isn’t listed.

1994 Schwinn PassageSize Legacy reference · 52/42/30T · 13–26T · 7-speed
Lowest1.15:1Highest4.00:1Total range347%
Estimated speed at 90 RPMLowest gear8.2 mphHighest gear28.3 mph

Uses front tire 700C×25; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1995 Schwinn Passage
1994 Schwinn Passage
Overview
Model Year
1995
1994
Brand
Schwinn
Schwinn
Model
Passage
Passage
Bicycle Type
Road/sport
Road/sport
Original MSRP
$539.95
$500.00
Colors
Light blue
—
Sizes
50 cm, 52 cm, 54 cm, 56 cm, 58 cm, 60 cm
48, 51, 54, 56, 58
Weight
—
24 lb
Frameset
Frame Construction
TIG-welded steel
TIG-welded steel
Frame Material
Chromoly, double-butted, main triangle
Tange chromoly, butted
Fork
Schwinn
Chromoly, unicrown
Fork Material
Chromoly, forged dropouts, unicrown crown
—
Drivetrain
Component Group
Shimano RSX
Shimano RX-100
Shifters
Shimano RSX down-tube
Shimano RX-100 down-tube
Front Derailleur
Shimano RSX (triple), bottom-pull/clamp-on 28.6 mm
Shimano RX-100
Rear Derailleur
Shimano RSX
Shimano STX
Crankset
Shimano RSX, 26/36/46 teeth
Shimano RX-100, 30/42/52 teeth
Rear Cogs
7-speed, 11 - 24 teeth
7-speed, 13 - 26 teeth
Chain
KMC SS-90, 1/2 x 3/32"
Shimano HG-50
Pedals
HTI quill type
Alloy Quill Type w/clips & straps
Brakes
Brakes
Shimano RSX Dual Pivot brakes, Shimano RSX levers
Shimano A350 brakes, levers
Cockpit & Contact Points
Headset
1" Tioga Expert
—
Handlebar
SR Modolo Bend anatomic
SR Modolo Bend
Stem
Chromoly
Chromoly 90 Degree Racing
Saddle
Viscount
Schwinn Racing
Seatpost
Polygon PM-311, 26.6 mm diameter
Polygon alloy
Wheels & Tires
Hubs
Shimano AceraX
Shimano alloy
Rims
Mavic M196, 32-hole
Araya SS-45, 32-hole
Spokes
Stainless steel, 2.0 mm straight gauge
—
Spoke Nipples
Brass nipples
—
Front Tire
700 x 26c Tioga Proline
700 x 25c skinwall
Wheel Size
700c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
73°
73°
Seat-tube angle
73.5°
73.5°
Chainstay / rear center
419.1 mm
420 mm
Wheelbase
1008.4 mm
1007 mm
Fork offset / rake
45.7 mm
45 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Sponsored affiliate link
Scroll to Top