Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Handling

    1995 GT Force has a 0.5° slacker head-tube angle than 1994 GT Force in the archived geometry. Frame size is not identified for 1995 GT Force and 1994 GT Force.

    Fork offset, tire size and wheelbase also affect steering; head angle alone is not a handling verdict.

  2. Gearing

    1995 GT Force has a 49% lower climbing ratio than 1994 GT Force.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1995 GT ForceSize Legacy reference · 46/36/26T · 12–28T · 7-speed
Lowest0.93:1Highest3.83:1Total range413%
Estimated speed at 90 RPMLowest gear6.6 mphHighest gear27.2 mph

Uses front tire 700C×26; rear size isn’t listed.

1994 GT ForceSize Legacy reference · 53/42T · 13–23T · 7-speed
Lowest1.83:1Highest4.08:1Total range223%
Estimated speed at 90 RPMLowest gear12.9 mphHighest gear28.7 mph

Uses front tire 700C×23; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1995 GT Force
1994 GT Force
Overview
Model Year
1995
1994
Brand
GT
GT
Model
Force
Force
Bicycle Type
Road race & triathlon
Road/sport
Original MSRP
$699.99
$699.00
Colors
Black
—
Sizes
50 cm, 52 cm, 54 cm, 56 cm, 58 cm, 60 cm
50, 52, 54, 56, 58, 60
Weight
—
—
Frameset
Frame Construction
Welded aluminum
Welded aluminum
Frame Material
7005 aluminum, double-butted
7005 aluminum, heat-treated
Fork
GT
Aluminum, bonded, Kinesis
Fork Material
Chromoly, unicrown crown
—
Drivetrain
Component Group
Shimano RSX STI
Shimano RX-100
Shifters
Shimano RSX STI Dual Control
Shimano RX-100 down-tube
Front Derailleur
Shimano RSX (triple), bottom-pull
Shimano RX-100
Rear Derailleur
Shimano RSX
Shimano RX-100
Crankset
Shimano RSX, 26/36/46 teeth
Shimano RX-100, 42/53 teeth
Rear Cogs
7-speed, 12 - 28 teeth
7-speed, 13 - 23 teeth
Chain
Shimano CN-UG50, 1/2 x 3/32"
Shimano HG-70
Pedals
Alloy w/clips and straps
Aero alloy w/clips
Brakes
Brakes
Shimano RSX Dual Pivot brakes, Shimano RSX levers
Shimano RX-100 brakes, levers
Cockpit & Contact Points
Headset
1" triple sealed mechanism
—
Handlebar
Modolo anatomic
Modolo aluminum w/Padded Tape
Stem
Alloy road
6061-T6 aluminum TIG-welded, heat-treated
Saddle
Vetta TT Tri-Shock
Vetta SL
Seatpost
Alloy micro-adjust, 27.2 mm diameter
Alloy micro-adjust
Wheels & Tires
Hubs
Shimano RSX
Shimano RX-100
Rims
Mavic M196, 32-hole
Mavic 195, 32-hole
Spokes
Stainless steel, 2.0 mm straight gauge
—
Spoke Nipples
Brass nipples
—
Front Tire
700 x 26c Tioga Proline S
700 x 23c Continental Super Sport Ultra
Wheel Size
700c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
73.5°
74°
Seat-tube angle
73.5°
73.5°
Chainstay / rear center
410 mm
410 mm
Wheelbase
991 mm
981 mm
Fork offset / rake
45 mm
40 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Campaign
Scroll to Top