Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Data limitation
No geometry is recorded for 2004 Felt S32.
- Data limitation
Only 2003 Felt S32 has enough published drivetrain data for gearing calculations.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Gearing unavailable for this size.
Lowest1.70:1Highest4.42:1Total range260%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 700C×23; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2004 Felt S32
2003 Felt S32
Overview
Model Year
2004
2003
Brand
Felt
Felt
Model
S32
S32
Bicycle Type
Road race & triathlon
Road race & triathlon
Original MSRP
$1,199.99
Not documented
Colors
Black
Red
Sizes
48cm, 50cm, 52cm, 54cm, 56cm, 58cm, 60cm
48cm 650c Wheel, 50cm 650c Wheel, 52cm 650c Wheel, 54cm, 54cm 650c Wheel, 56cm, 58cm, 60cm
Weight
20.6 lb
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Felt 7005 custom aero tubing
7005 aluminum w/replaceable derailleur hanger
Fork
Felt Aero Tri
Felt
Fork Material
Carbon fiber composite w/chromoly steerer
Carbon fiber composite w/alloy steerer, aero crown
Drivetrain
Component Group
Road Mix
Road Mix
Shifters
Shimano Dura-Ace bar-end
Shimano Dura-Ace SL-BS77 bar-end
Front Derailleur
Shimano Tiagra
Shimano 105, clamp-on
Rear Derailleur
Shimano Ultegra
Shimano 105 GS black
Crankset
FSA forged, 39/53 or 44/55 teeth
FSA forged alloy, 39/53 teeth
Bottom Bracket
TH Splined
Tien Hsin
BB Shell Width
68mm English
68mm American
Rear Cogs
9-speed, 12 - 23 teeth
9-speed, 12 - 23 teeth
Chain
KMC Z9900, 1/2 x 3/32"
KMC Z9900, 1/2 x 3/32"
Pedals
—
Not included
Brakes
Brakes
Aluminum dual pivot brakes, Tektro Bar-end type levers
Aluminum dual pivot brakes, Dia-Compe 188 TRI levers
Cockpit & Contact Points
Headset
1" integrated TH integrated
1" integrated Tien Hsin
Handlebar
Profile Design Aerolite w/clip-on bars
Aluminum tri bar
Handlebar Extensions
—
Syntace C-2 Streamliner
Stem
Felt 6061 alloy
Felt S-1.4
Saddle
Selle Italia Onda
Selle Italia Trimatic 2
Seatpost
Felt Alloy, micro adjust, zero offset
Felt aluminum micro-adjust, 27.2mm diameter
Wheels & Tires
Hubs
Alex ALX 300
Alex ALX 300
Rims
Alex ALX 300
Alex ALX 300
Spokes
—
Alex
Front Tire
700/650 x 23c Continental Sport
700 x 23c Hutchinson Carbon Comp
Wheel Size
700c/650c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
—
73°
Seat-tube angle
—
76°
Chainstay / rear center
—
405 mm
Wheelbase
—
1006 mm
Fork offset / rake
—
40 mm
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.