Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Handling

    2004 Iron Horse Triumph has a 1.0° slacker head-tube angle than 2001 Iron Horse Triumph in the archived geometry. Frame size is not identified for 2004 Iron Horse Triumph and 2001 Iron Horse Triumph.

    Fork offset, tire size and wheelbase also affect steering; head angle alone is not a handling verdict.

  2. Gearing

    2001 Iron Horse Triumph has a 8% lower climbing ratio than 2004 Iron Horse Triumph.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

2004 Iron Horse TriumphSize Legacy reference · 52/42/30T · 12–24T · 8-speed
Lowest1.25:1Highest4.33:1Total range347%
Estimated speed at 90 RPMLowest gear8.9 mphHighest gear30.7 mph

Uses front tire 700C×25; rear size isn’t listed.

2001 Iron Horse TriumphSize Legacy reference · 52/42/30T · 13–26T · 8-speed
Lowest1.15:1Highest4.00:1Total range347%
Estimated speed at 90 RPMLowest gear8.1 mphHighest gear28.2 mph

Uses front tire 700C×23; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
2004 Iron Horse Triumph
2001 Iron Horse Triumph
Overview
Model Year
2004
2001
Brand
Iron Horse
Iron Horse
Model
Triumph
Triumph
Bicycle Type
Road/sport
Road/sport
Original MSRP
$599.99
$649.00
Colors
Blue, Red/Chrome
Red
Sizes
47cm, 50cm, 52cm, 54cm, 56cm, 58cm, 61cm
50, 52, 54, 56, 58, 60
Weight
—
24 lb
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Aluminum
Reynolds 520
Fork
Iron Horse
Iron Horse
Fork Material
Carbon fiber composite w/chromoly steerer, aero crown
Chromoly, unicrown crown
Drivetrain
Component Group
Shimano Sora Triple
Shimano Sora Triple
Shifters
Shimano Sora STI Dual Control
Shimano Sora STI Dual Control
Front Derailleur
Shimano Sora Triple
Shimano Sora, bottom-pull/clamp-on 28.6mm
Rear Derailleur
Shimano Sora GS
Shimano Sora GS
Crankset
Aluminum, 30/42/52 teeth
Shimano Sora, 30/42/52 teeth
Bottom Bracket
Semi-cartridge
Shimano BB-LP27, 113mm spindle
BB Shell Width
68mm English
68mm English
Rear Cogs
8-speed, 12 - 24 teeth
8-speed, 13 - 26 teeth
Chain
Shimano HG-50, 1/2 x 3/32"
Shimano CN-HG50, 1/2 x 1/8"
Pedals
Aluminum platform
Aluminum w/clips & straps
Brakes
Brakes
Tektro dual pivot brakes, Shimano Sora STI Dual Control levers
Shimano Sora dual pivot brakes, Shimano Sora STI Dual Control levers
Cockpit & Contact Points
Headset
1 1/8" integrated Aheadset
1" Tioga SE-21
Handlebar
Aluminum
Aluminum drop bar
Stem
Aluminum threadless
Aluminum
Saddle
Selle San Marco Millenium
Iron Horse
Seatpost
Aluminum micro-adjust, 27.2mm diameter
Aluminum micro-adjust, 27.0mm diameter
Wheels & Tires
Hubs
Aluminum QR
Front: aluminum, Q/R, Rear: Shimano Sora
Rims
Alex aluminum, 32-hole
Vuelta Airline 2, 32-hole
Spokes
Stainless steel, 14ga. (2.0mm) Black straight gauge
Reinforced nylon, 14g straight gauge
Spoke Nipples
—
Brass nipples
Front Tire
700 x 25c Hutchinson Flash
700 x 23c Kenda Koncept
Wheel Size
700c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
73°
74°
Seat-tube angle
73°
73°
Chainstay / rear center
405 mm
410 mm
Wheelbase
980 mm
980.5 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Scroll to Top