Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Data limitation

    No geometry is recorded for 2004 Schwinn Automatic Comp.

  2. Gearing

    2004 Schwinn Automatic Comp has a 11% lower climbing ratio than 2001 Schwinn Automatic Comp.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

2004 Schwinn Automatic Comp39T · 16T · 1-speed
Ratio2.44:1
Estimated speed at 90 RPMGear13.0 mph

Rear tire: 20×1.95.

2001 Schwinn Automatic CompSize Legacy reference · 44T · 16T · 1-speed
Ratio2.75:1
Estimated speed at 90 RPMGear14.5 mph

Rear tire: 20×1.85.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
2004 Schwinn Automatic Comp
2001 Schwinn Automatic Comp
Overview
Model Year
2004
2001
Brand
Schwinn
Schwinn
Model
Automatic Comp
Automatic Comp
Bicycle Type
Freestyle/jumping
Freestyle/jumping
Original MSRP
$199.99
$269.95
Colors
Blue
Chrome-Plated, Matte Black
Sizes
Expert
Pro
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Chromoly seat tube, down tube
Chromoly
Fork
Schwinn
Schwinn
Fork Material
Chromoly, unicrown crown
Chromoly, unicrown crown
Drivetrain
Crankset
3-piece steel, 39 teeth
Schwinn XS one piece, 44 teeth
Rear Cogs
1-speed, 16 teeth
1-speed, 16 teeth
Chain
KMC, 1/2 x 1/8"
1/2 x 1/8"
Pedals
Die cast alloy
Schwinn XS Comp aluminum platform
Brakes
Brakes
Tektro alloy U-brake rear brakes, Tektro rear levers
Tektro U-brake rear brakes, aluminum rear levers
Cockpit & Contact Points
Headset
1 1/8" threadless VP w/gyro
Dia-Compe SB-1-F
Handlebar
Hi-tensile steel
Steel, 2-Piece
Handlebar Extensions
—
Not included
Stem
Aluminum threadless
Schwinn XS aluminum
Saddle
Padded freestyle, 8mm rails
Schwinn 2-Piece
Seatpost
25.4mm diameter
Steel micro-adjust, 26.6mm diameter
Wheels & Tires
Hubs
Aluminum, 14mm axle
Aluminum
Rims
Jalco ST-32, 48-hole
Aluminum, 36-hole
Spokes
Stainless steel, 14ga. (2.0mm) straight gauge
—
Spoke Nipples
Brass nipples
—
Front Tire
20 x 1.95" Schwinn XS Gripper
20 x 2.125" Schwinn XS Dirt Diggler
Rear Tire
20 x 1.95 Schwinn XS Hucker
20 x 1.85" Schwinn XS Dirt Diggler
Wheel Size
20" wheels
20" wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
—
74°
Seat-tube angle
—
70.5°
Chainstay / rear center
—
381 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Sponsored affiliate link
Scroll to Top