Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
No key difference could be established from the available data. Check the full table for the details.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Lowest0.65:1Highest3.23:1Total range499%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 26×1.95; rear size isn’t listed.
Lowest0.65:1Highest3.23:1Total range499%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 26×1.95; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2003 Jamis Cross Country 1.0
2004 Jamis Cross Country 1.0
Overview
Model Year
2003
2004
Brand
Jamis
Jamis
Model
Cross Country 1.0
Cross Country 1.0
Bicycle Type
Mountain bike, front suspension
Mountain bike, front suspension
Original MSRP
$269.95
$279.95
Colors
Gloss White/Midnight Blue, Platinum/Gloss Black
Blue/Silver, Black
Sizes
12", 14", 17", 19", 21", womens 14.5", womens 17.5"
12", 14", 17", 19", 21"
Weight
29.5 lb
29.5 lb
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
6061 T6 aluminum
6061 T6 aluminum
Fork
In-Sync Grind 323, 70mm travel
SR Suntour XC50
Fork Material
Aluminum/magnesium, single crown
Aluminum/magnesium, single crown
Drivetrain
Component Group
Mountain Mix
Mountain Mix
Shifters
Shimano Acera EF35
Shimano Acera EF35
Front Derailleur
SRAM 3.0, top-pull/clamp-on 31.8mm
SRAM 3.0, top-pull/clamp-on 31.8mm
Rear Derailleur
Shimano Acera
Shimano Altus
Crankset
Cyclone aluminum, 22/32/42 teeth
SR Suntour XCC-150PB, 22/32/42 teeth
Bottom Bracket
Loose ball, 122.5mm spindle
Loose ball, 122.5mm spindle
BB Shell Width
68mm English
68mm English
Rear Cogs
7-speed, 13 - 34 teeth
7-speed, 13 - 34 teeth
Chain
KMC UG-50, 1/2 x 3/32"
KMC UG-50, 1/2 x 3/32"
Pedals
Wellgo resin
Wellgo resin
Brakes
Brakes
Tektro forged linear-pull brakes, Shimano Acera levers
Tektro forged linear-pull brakes, Shimano Acera levers
Cockpit & Contact Points
Headset
1 1/8" threadless Tange TG-4
1 1/8" threadless Tange TG-4
Handlebar
Aluminum, 1" rise
Aluminum, 1" rise
Handlebar Extensions
Not included
Not included
Stem
Jamis aluminum
Jamis aluminum
Saddle
Jamis ATB
Jamis ATB
Seatpost
Aluminum, suspension, 27.2mm diameter
Aluminum, suspension, 27.2mm diameter
Wheels & Tires
Hubs
Formula aluminum, Q/R
Formula aluminum, Q/R
Rims
Weinmann CN-520, 32-hole
Weinmann CN-520, 32-hole
Spokes
Stainless steel, 14ga. (2.0mm) straight gauge
Stainless steel, 14ga. (2.0mm) straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
26 x 1.95" Cheng Shin
26 x 1.95" Cheng Shin
Wheel Size
26" wheels
26" wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
71°
71°
Seat-tube angle
73.5°
73.5°
Chainstay / rear center
425 mm
425 mm
Wheelbase
1059 mm
1059 mm
Fork offset / rake
38.1 mm
38.1 mm
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.