- Frame
- Tange chromoly
- Groupset
- Shimano STX
Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
No key difference could be established from the available data. Check the full table for the details.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Lowest0.79:1Highest3.82:1Total range486%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 700C×38; rear size isn’t listed.
Lowest0.79:1Highest3.82:1Total range486%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 700C×38; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
1995 Jamis Tangier
1997 Jamis Tangier
Overview
Model Year
1995
1997
Brand
Jamis
Jamis
Model
Tangier
Tangier
Bicycle Type
Hybrid
Hybrid
Original MSRP
$439.95
$449.95
Colors
Green, Midnight Blue
Cobalt blue
Sizes
16", 17.5", 19.5", 21.5", 23"
16", 17.5", 19.5", 21.5", 23", womens 16", womens 19"
Weight
26.5 lb
25.2 lb
Frameset
Frame Construction
TIG-welded steel
TIG-welded
Frame Material
Tange chromoly
Chromoly, double-butted
Fork
Spinner
Spinner
Fork Material
Chromoly, unicrown crown
Chromoly, butted, unicrown crown
Drivetrain
Component Group
Shimano STX
Shimano STX
Shifters
Grip Shift SRT-300
Grip Shift SRT-400i
Front Derailleur
Shimano STX, bottom-pull/clamp-on 28.6 mm
Shimano STX top-swing, top-pull/clamp-on 28.6 mm
Rear Derailleur
Shimano STX
Shimano STX
Crankset
Shimano STX HyperDrive-C, 22/32/42 teeth
Shimano STX, 22/32/42 teeth
Bottom Bracket
—
Shimano BB-LP26, 110 mm spindle
BB Shell Width
—
68mm English
Rear Cogs
7-speed, 11 - 28 teeth
7-speed, 11 - 28 teeth
Chain
Shimano CN-IG50, 1/2 x 3/32"
Shimano CN-IG51, 1/2 x 3/32"
Pedals
Wellgo LU-923
Wellgo LU-951 w/clips & straps
Brakes
Brakes
Shimano Alivio brakes, Dia-Compe PC-7 levers
Shimano Alivio A-brake brakes, Dia-Compe PC-7N levers
Cockpit & Contact Points
Headset
1" YST Sealed Tech
1" Victor VP-H67W
Handlebar
6061 T6 aluminum
Kalloy aluminum
Handlebar Extensions
Not included
Not included
Stem
Jamis chromoly
Kalloy chromoly
Saddle
Jamis
Viscount 2974
Seatpost
Polygon PM-311, 26.8 mm diameter
Kalloy SP-265, 26.8 mm diameter
Wheels & Tires
Hubs
Joy Tech alloy cassette hubset, Q/R
Shimano Alivio
Rims
Weinmann 4019, 36-hole
Sun Rims CR18, 32-hole
Spokes
Stainless steel, straight gauge
Shuhn Lih stainless steel, 2.0mm straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
700 x 38c Cheng Shin
700 x 38c Cheng Shin C-1069
Wheel Size
700c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
72°
72°
Seat-tube angle
73.5°
73.5°
Chainstay / rear center
436.9 mm
434.3 mm
Wheelbase
1023.6 mm
1036.3 mm
Fork offset / rake
50.8 mm
50.8 mm
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.